SCREW TERMINAL TYPE ALUMINUM ELECTROLYTIC CAPACITORS
New
Option Service: Charge-Discharge
Charge-Discharge option available series
• Conform RoHS
Type of series
FXA
FX2
FXR
HXA
GXA
GX2
GXR
Features
Temperature range
−40℃∼85℃
−40℃∼105℃
• Suited to high frequency Charge-Discharge for AC servomoter,
Warranty life
5,000h 5,000h 5,000h 20,000h 5,000h 5,000h 5,000h
general inverter.
Reference page
P.83
P.81
P.65
P.94
P.92
P.90
P.69
• To our regular series, we add Charge-Discharge function.
The size / performance is as it is.
Product Specifications
Specifications
Items
Rated voltage 400, 450V.DC
Capacitance tolerance ±20%(20℃, 120Hz)
0.01CV (µA) or 5 mA, whichever is smaller or less (20℃, after 5 minutes)
Leakage current
[ C=nominal capacitance (µF),V= rated voltage (V) ]
Dissipation factor
Less than the value specified in the standard products table
(20℃, 120Hz)
Permissible
ripple current
Please refer to the Reference page of Charge-Discharge available series.
After an application of specified ripple current on top of rated voltage for Warranty
Endurance of high life at the maximum operating temperature, following requirements must be met.
temperature load Capacitance tolerance : ±15% or less of the initial value
Dissipation factor : 175% or less of the specified initial value
behavior
Leakage current : Specified initial value or less
After an application of charge-discharge voltage for 20 million times (charge-discharge
Endurance of (∆V) =150V, cycle 3 or 2 Hz (*1)) at 40°C, following requiements must be met.
charge-discharge Capacitance tolerance : ±15% or less of the initial value
Dissipation factor : 175% or less of specified initial value
behavior
Leakage current : Specified initial value or less
Hexagon-head bolt
Insulation plate
Insulation sleeve
Vent
Anode marking
Reference
Screw terminal
P±1
Marking
L ±2
When it is used rippie current load together with charge-discharge, please ask us
it, because the confirmation of temperature rise (An increase in core temperature
by intemal heating due to ripple current temperature) is necessary.
If it is not used together, we recommend measuring the core temperature of the
capacitor with a thermocouple.
(We can manufacture samples with inserted thermocouples according to
customer requests.)
Others
T ±1
JIS C 5101-4.
D±2
*1 Charge-Discharge frequency:
(unit:mm)
Type
FXA
HXA
GXA
FX2
GX2
FXR
φD
51
64
77
90
51
64
77
90
101
64
77
90
P
22.0
28.6
32.0
32.0
22.0
28.6
32.0
32.0
41.5
28.6
32.0
32.0
S
M5×10
M5×10
M5×10
M5×10
M5×10
M5×10
M5×10
M5×10
M8×16
M5×10
M6×12
M6×12
T
4.5
4.5
4.5
4.0
5.5
5.5
5.0
5.0
11.0
4.5
3.0
3.0
Cap material
PPS
The highest Charge-Discharge frequency of following 9 products are 2 Hz, all ther products 3 Hz.
Type of
series
Rated Voltage
Code
(V. DC)
FXA
FX2
400
090×236
090×131
090×157
090×196
090×236
101×237
090×236
15000
101×195
101×237
18000
All other products
15000
10000
12000
15000
18000
22000
400
Phenol
resin
450
PPS
Standard Products Table
Please refer to the Reference page of Charge-Discharge available
series.
Product name
The highest
Charge-Discharge
frequency(Hz)
FXA2G153YDH
FX22G103YFDH
FX22G123YDH
FX22G153YDH
FX22G183YDH
FX22G223YDH
FX22W153YFDH
FX22W153YGDH
FX22W183YDH
2
3
Product code : (Example) FX2 type 400 V 10,000µF±20%
.:
Please refer to the Reference page of Charge-Discharge available
series.
Ripple current correction coefficient
Capacitance Case size
(μF)
φDXL ㎜)
(
Type of series
/ ! ; - ,0
E case (øD: 77 mm) product
Charge-discharge option code
Case code
Type of bracket code
Capacitance code
Rated voltage code
To figure this option, add a postscript DH at the end of the product name.
Please refer to the Reference page of Charge-Discharge available
series.
About the shape and dimentions of bracket, see page 53.
57
Hitachi AIC Inc.