IMT17
Transistors
General purpose transistor
(isolated dual transistors)
IMT17
External dimensions (Unit : mm)
2.9±0.2
1.1+0.2
−0.1
1.9±0.2
0.8±0.1
0.95 0.95
(5)
(4)
(6)
+0.2
1.6
−0.1
(4)
2.8±0.2
Features
1) Two 2SA1036K chips in an SMT package.
2) Same size as SMT3 package, so same mounting
machine can be used for both.
3) Transistor elements are independent, eliminating
interference.
4) High collector current. IC = −500mA
5) Mounting cost, and area, are reduced by one half.
(2) (1)
+0.1
0.3−0.05
(3)
+0.1
0.15−0.06
All terminals have same dimensions
ROHM : SMT6
EIAJ : SC-74
Structure
Epitaxial planar type
PNP silicon transistor
(5)
(6)
0 to 0.1
Tr1
Tr2
0.3 to 0.6
Applications
General purpose small signal amplifier
(3)
(2)
(1)
Abbreviated symbol: T17
Packaging specifications
Packaging type
Taping
Code
Part No.
The following characteristics apply to both Tr1 and Tr2.
T110
Basic ordering unit (pieces)
3000
IMT17
Absolute maximum ratings (Ta=25°C)
Parameter
Limits
Symbol
Unit
Collector-base voltage
VCBO
−60
Collector-emitter voltage
VCEO
−50
V
Emitter-base voltage
VEBO
−5
V
V
Collector current
IC
−500
mA
Power dissipation
Pd
300(TOTAL)
mW
Junction temperature
Tj
150
°C
Storage temperature
Tstg
−55 to +150
°C
∗
∗ 200mW per element must not be exceeded.
Electrical characteristics(Ta=25°C)
Parameter
Symbol
Typ.
Max.
Unit
Collector-base breakdown voltage
BVCBO
−60
−
−
V
IC= −100µA
Collector-emitter breakdown voltage
BVCEO
−50
−
−
V
IC= −1mA
Emitter-base breakdown voltage
BVEBO
−5
−
−
V
IE= −100µA
V= −30V
Min.
Conditions
Collector cutoff current
ICBO
−
−
−0.1
µA
Emitter cutoff current
IEBO
−
−
−0.1
µA
V= −4V
VCE(sat)
−
−
−0.6
V
IC/IB= −500mA/ −50mA
hFE
120
−
390
−
VCE= −3V, IC= −100mA
fT
−
200
−
MHz
Cob
−
7
−
pF
Collector-emitter saturation voltage
DC current transfer ratio
Transition frequency
Output capacitance
∗
VCE= −5V, IE= 20mA, f= 100MHz
VCB= −10V, IE= 0A, f= 1MHz
∗ Measured using pulse current.
Rev.A
1/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1
