MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
GXE
Long Life, Downsized, 125℃
Series
●For
automobile modules and other high temperature applications
●Downsize, long life, low impedance and better low temperature characteristics
GXE
●Endurance with ripple current : 2,000 to 5,000 hours at 125℃
●Solvent resistant type except 63 to 450V (see PRECAUTIONS AND GUIDELINES)
●RoHS Compliant
Downsized
Higher ripple current
GPA
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range -40 to +125℃ (10 to 250Vdc ) -25 to +125℃ (350 to 450Vdc)
Rated Voltage Range 10 to 450Vdc
Capacitance Tolerance ±20% (M)
10 to 100Vdc
Leakage Current
I=0.03CV or 4µA, whichever is greater.
(at 20℃, 120Hz)
160 to 450Vdc
CV≦1,000 I=0.1CV+40
CV>1,000 I=0.04CV+100
(at 20℃, 1 minute)
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Rated voltage (Vdc)
10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 350 to 450V
tan (Max.)
δ
0.24
0.20
0.20 0.16 0.14 0.12 0.10 0.10 0.08 0.08
(at 20℃, 120Hz)
When nominal capacitance exceeds 1,000µF, add 0.02 to the above value for each 1,000µF increase.
Rated voltage (Vdc)
10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 350 to 450V
Z(-25℃)/Z(+20℃)
6
3
2
2
2
2
2
2
2
3
(at 120Hz)
Z(-40℃)/Z(+20℃)
6
4
4
4
4
4
4
4
6
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified time at 125℃.
10 to 100Vdc
160 to 450Vdc
Time
φ8 : 2,000hours φ10 : 3,000hours φ12.5 &φ16 : 5,000hours 2,000hours
≦
±30% of the initial value
Capacitance change
≦
±20% of the initial value
D.F. (tan )
≦200% of the initial specified value
≦300% of the initial specified value
δ
≦The initial specified value
≦The initial specified value
Leakage current
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours (500 hours
for 350 to 450Vdc) at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage
according to Item 4.1 of JIS C 5101-4.
10 to 100Vdc
160 to 450Vdc
≦
±30% of the initial value
≦
±20% of the initial value
Capacitance change
D.F. (tan )
≦300% of the initial specified value ≦200% of the initial specified value
δ
Leakage current
≦The initial specified value
≦500% of the initial specified value
Dissipation Factor
(tan )
δ
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
◆DIMENSIONS [mm]
F±0.5
Code : E
φd
Sleeve (PET : Orange)
F±0.5
●Terminal
φD
φD'
φd
F
φD'
L'
Vent
15min.
4min.
(φ12.5 & φ16)
(φ8 & φ10)
L'
8
0.6
3.5
10 12.5 16
0.6 0.6 0.8
5.0 5.0 7.5
φD+0.5max.
L+2.0max.
Gas escape end seal
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
E GXE AAA E AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 4.7µF:4R7,10µF:100,100µF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 10V:100,100V:101)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/2)
CAT. No. E1001M
