The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Fixed Attenuators (SMA Type)
AT-100, AT-200, and AT-300 Series
sFeatures
1.Abundant Variations of Attenuators
Attenuation amounts are available in abundant
variations from 0 to 4 dB in 0.5 dB steps, from 4 to
10 dB in 1 dB steps, and in 12, 13, 15, 20, 26 and
30 dB so that levels can be finely adjusted.
2.SMA Type
AT-103
The coupling portions are available in all types of
plug and jack combinations and stainless steel is
used for the external cladding to form a small and
durable structure.
AT-206
3.High Degree of Matching and High Reliability
The design of the attenuation element uses a
distributed constant circuit and metal film resistor. A
high degree of matching is achieved as indicated in
the VSWR of the appended tables. Furthermore,
these attenuators show stable characteristics for
environments of varying temperature, humidity, and
gases.
AT-310
sProduct Specifications
Ratings
Rated frequency range (Note)
Characteristic impedance
Maximum Input Power
DC to 18.0 GHz
50 ohms
1W
Operating temperature range
Operating relative humidity
-10ç to +65ç
95% Max.
Note: The frequency range will differ depending on the model.
Item
Standard
1.Vibration
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
2.Shock
3.Temperature cycle
No damage, cracks, or parts dislocation
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
200 cycles
qThe test method conforms to MIL-STD-202.
sMaterials
sOrdering Information
Part
Material
Finish
Connector Body
Stainless steel
Passivated
Insulator
PTFE
----------
Male contacts
Beryllium copper
Gold plating
Female contacts
Beryllium copper
Gold plating
Attenuation element
Metal film
----------
AT - 1 00-(0)
1
2
3
1 AT: Indicates a fixed attenuator
2 Indicates the Series Name (Coupling Portion)
1: SMA plug - jack
2: SMA plug - plug
3: SMA jack - jack
78
3 Attenuation
01
06
00-(0)
00-(0.5)
00-(3.5)
: 1dB
: 6dB
: 0dB
(Through)
: 0.5dB
: 3.5dB