21-Serie PBA-A_24-Serie PBA-A.qxd 31/10/14 08:55 Page129
PBA series
Piezo switches
Specifications
UG1410A
K Bushing diameter 16 mm, 19 mm or 22 mm
K Sealed to IP68 and IP69K (switches mounted on panel)
K Easy to clean metal surface
K Very long life expectancy
K Ring or dot illumination
B2
ENVIRONMENTAL SPECIFICATIONS
MATERIALS
• Sealing : IP68 per IEC 529, IP69K per DIN 40050-9
(switches mounted on panel)
• Vibration resistance : 10-500 Hz / 10 g per IEC 60068-2-6
• Operating temperature : -40°C to +75°C
• EMC compatibility according to EN 61058-1 for the whole range
• EMC compatibility according to EN 61000-4 & EN61000-6-2 for model
1A (code 002)
ELECTRICAL AND GENERAL SPECIFICATIONS
• Max. current/voltage rating :
- Function A : standard 200mA 24VAC/DC - option 1A 24VAC/DC
- Function B : standard 100mA 24VAC/DC
• Switch resistance ON : 10Ω max.
• Switch resistance OFF : 5MΩ min.
• Operating force : 2 to 6N
• Life expectancy : 50 million cycles
• LED consumption : Illuminated dot 10mA - Illum. ring 20mA (functions A-B-C)
• Power consumption for function 1 : non-illum.10mA - illuminated 30mA
Note : to maintain the ESD performance,
always add a ground washer when the
panel is made of non-conductive material
(PVC, polycarbonate).
For part numbers, see «Mounting
accessories» on the following pages.
SEALING IP69K
1m
SEALING IP68
• Case : aluminium, anodized
or stainless steel 316L
• Multi-wire leads section 0,22 mm2
length 300 mm, twisted by pair
• Cable, length 300 mm, section
depending on switch model
• PC terminals : bronze, tin plated
3
3
One-piece bushing
Epoxy sealed terminals
O-ring
1
2
Continuous immersion in water
High pressure, high temperature wash down
IP68 test conditions
Continuous immersion in water
(1m, 24 hours)
IP69K test conditions
. Pressure : 80 - 120 bars
. Distance : 15 cm
. Temperature : 80°C ± 5°C
. Flow : 14 - 16 l/mn
. Duration : 30 seconds per position
The company reserves the right to change specifications without notice.
APEM
www.apem.com
B2-129
