MAX696/MAX697 Microprocessor Supervisory Circuits General Description Features The MAX696 and MAX697 are supplied in 16-pin packages and perform six functions: Ordering Information The MAX696/MAX697 supervisory circuits reduce the complexity and number of components required for power-supply monitoring and battery-control functions in microprocessor (μP) systems. These include μP reset and backup-battery switchover, watchdog timer, CMOS RAM write protection, and power-failure warning. The MAX696/MAX697 significantly improve system reliability and accuracy compared to that obtained with separate ICs or discrete components. 1) A reset output during power-up, power-down, and brownout conditions. The threshold for this “lowline” reset is adjustable by an external voltagedivider. 2) A reset pulse if the optional watchdog timer has not been toggled within a specified time. 3) Individual outputs for low-line and watchdog fault conditions. 4) The reset time may be left at its default value of 50ms, or may be varied with an external capacitor or clock pulses. 5) A separate 1.3V threshold detector for power-fail warning, low-battery detection, or to monitor a power supply other than VCC. The MAX696 also has battery-backup switching for CMOS RAM, CMOS microprocessor, or other lowpower logic. The MAX697 lacks battery-backup switching, but has write-protection pins (CE IN and CE OUT) for CMOS RAM or EPROM. In addition, it consumes less than 250 microamperes. ●● ●● ●● ●● ●● ●● ●● ●● Adjustable Low-Line Monitor and Power-Down Reset Power-OK/Reset Time Delay Watchdog Timer—100ms, 1.6s, or Adjustable Minimum Component Count 1μA Standby Current Battery-Backup Power Switching (MAX696) On-Board Gating of Chip-Enable Signals (MAX697) Separate Monitor for Power-Fail or Low-Battery Warning PART TEMP RANGE PIN-PACKAGE MAX696C/D 0°C to +70°C Dice MAX696CPE 0°C to +70°C 16 PDIP MAX696CWE 0°C to +70°C 16 Wide SO MAX696EPE -40°C to +85°C 16 PDIP MAX696EJE -40°C to +85°C 16 CERDIP MAX696EWE -40°C to +85°C 16 Wide SO MAX696MJE -55°C to +125°C 16 CERDIP Ordering Information continued at end of data sheet. Devices in PDIP and SO packages are available in both leaded and lead(Pb)-free packaging. Specify lead free by adding the + symbol at the end of the part number when ordering. Lead free not available for CERDIP package. Pin Configurations TOP VIEW ●● ●● ●● ●● Computers Controllers Intelligent Instruments Critical μP Power Monitoring Typical Operating Circuit appears at end of data sheet. Pin Configurations continued at end of data sheet. 19-0829; Rev 5; 7/14 1 16 RESET VOUT 2 15 RESET VCC 3 14 WDO GND 4 13 LLIN BATT ON 5 12 N.C. LOW LINE 6 11 WDI OSC IN Applications VBATT 7 10 PFO OSC SEL 8 9 PFI MAX696




Maxim Integrated




アナログおよびミックスドシグナル半導体製品を設計、製造、販売している米国系の株式会社である。 マキシム・インテグレーテッドは、工業、通信、民生、コンピューティングの各市場向けに集積回路を開発しています


Not pic File


型式 数量 D/C・lead 備考 選択
MAX696CWE 474個    
MAX696CWE 474個    
MAX696CWE 350個    
MAX696CWE 106個 9318  
MAX696CWE 98個    
MAX696CWE 51個 9824  
MAX696CWE 17個    
MAX696CWE 14個 95+  
MAX696CWE 11個    
MAX696CWE 9個 02