MC10H350
PECL* to TTL Translator
(+5 Vdc Power Supply Only)
Description
The MC10H350 is a member of the 10H family of high performance
ECL logic. It consists of 4 translators with differential inputs and TTL
outputs. The 3−state outputs can be disabled by applying a HIGH TTL
logic level on the common OE input.
The MC10H350 is designed to be used primarily in systems
incorporating both ECL and TTL logic operating off a common power
supply. The separate VCC power pins are not connected internally and
thus isolate the noisy TTL VCC runs from the relatively quiet ECL
VCC runs on the printed circuit board. The differential inputs allow the
MC10H350 to be used as an inverting or noninverting translator, or a
differential line receiver. The MC10H350 can also drive CMOS with
the addition of a pullup resistor.
http://onsemi.com
MARKING DIAGRAMS*
16
MC10H350P
AWLYYWWG
16
1
PDIP−16
P SUFFIX
CASE 648
1
1 20
Features
• Propagation Delay, 3.5 ns Typical
• MECL 10K™ Compatible
• Pb−Free Packages are Available*
20 1
PLCC−20
FN SUFFIX
CASE 775
A
WL
YY
WW
G
10H350G
AWLYYWW
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2012
October, 2012 − Rev. 10
1
Publication Order Number:
MC10H350/D
