T4 MINI TRIM SWITCHES
MT
T4 MINI TRIM
SWITCHES
4-WAY MINI TRIM, COMMERCIAL & MILITARY GRADES
TRIM SWITCHES
The T4 Mini Trim is a single pole, 4 throw, center off, momentary
contact (self return to center off). Numerous button styles are
available on both the Commercial and Military grade switch
versions. Mini Trims are typically press fit into control grips or
panel mounted usingversions with an 11/16” threaded case.
Mini Trims are also available with multiple sealing levels to fit all
applications.
Standard Characteristics/Ratings:
Typical Dimensions
ELECTRICAL RATINGS:
Load Rating
Resistive
10mA @ 5VDC (low level)
Inductive
1A @ 28VDC
DWV 1050Vrms
Low Level
10mA Resistive @ 5VDC
Electrical Life:
100,000 cycles 1A Inductive @ 28VDC
Lever Travel:
15° max from center OFF
Seal:
-55°C to +85°C
Operating Force:
Press Fit
IP64 or IP68S or MIL-PRF-8805 Design 3
Operating Temp Range:
16 oz +/- 6 oz
Lever Pivot & Stop Strength: Switch is capable of withstanding a force of 25.0 lbs.
applied to the actuating button. The button also
withstands 15.0 lbs. minimum pull force.
Threaded Body
T4
MATERIALS:
Aluminum alloy or thermoplastic
Case:
Button: Thermoplastic
POS. 2
2
Terminals:
C
POS. 1 1
Press Fit
Threaded Body
4
POS. 4
SCHEMATIC
T4
–
X
Terminal Hardware:
3 POS. 3
Silver over brass
Brass with gold over silver for low level
None provided
Mounting Hardware:
Hex nut, tooth lockwasher, panel seal gasket
where applicable
T4 MINI TRIM PART NUMBER CODE
X
X
X
X
X
Series
Grade
Button Style
Case Style
Seal Level
T4. 4-Way
C. Commercial
M. Military
A. 2-Way Jog
B. Tall Jog
C. Rocker
D. Cone
E. LRUD Hat
F. IOUD Hat
G. Hat
H. Stadium
J. Castle
K. 4-Way Jog
L. Short Bat
M. Bat
N. Post
P. 4-40 Threaded Post
1. Press Fit
2. Threaded
1. IP64 Dusttight
1. Standard
2. IP68S Watertight
2. ow Level
L
3. Design Symbol 3 Watertight
per MIL-PRF-8805 and Meets
Environmental Testing per
MIL-DTL-9419
Specifications Subject To Change Without Notice
Current Rating
Button Color*
1. Red
2. Black
8. Gray
N. Not Applicable**
Only available with military grade.
* Contact factory for additional button colors.
** se when specifying button styles L, M, N and P.
U
www.ottoexcellence.com
191
