Discontinued as of September 30, 2010
AXC
CARD-EDGE
CONNECTORS (AXC)
FOR PC BOARD
TO PC BOARD
Solder-dip type with flange
Solder-dip type without flange
FEATURES
1. Long insertion and removal life.
Thanks to our original contact shape, low
insertion force is required and it is
designed so that the contact position
shifts at the start and end of card
insertion. This reduces metal abrasion.
• Standard type: 10,000 times
• Low-insertion-force, long life type:
30,000 times
3. Incorrect or reverse insertion can
be prevented.
By means of the key to prevent incorrect
insertion and the slit fabrication of the
printed circuit board, reverse insertion
into a printed circuit board block or
incorrect insertion into a similarly
appearing printed circuit board block can
be prevented.
Contact shape
APPLICATIONS
Contact
Compliance with RoHS Directive
Guide face
• Communication equipment
• Measuring equipment
• Factory automation related equipment
PC board
Guide face contact position
Final contact position
2. Low insertion types are also
available.
Among solder-dip types, low insertion
types are available with approximately
0.490N, 50gf/ contact and less than 1/4
of the standard connector with a good fit
feel.
• What is the low-insertion/long-life type?
This connector employs a unique softinsertion construction with a step provided in
the contact. Low insertion power (less than
30% of standard connector) and long life
(over 30,000 insertion/removal times) is
realized.
Soft insertion construction
with step provided in the
contacting element
Long
Short
Insertion/removal force comparison
between low insertion and standard types
Removal power Insertion power
Connectors for industrial equipment
88.3N {9kgf}
Standard connector
0
7.0mm
Low profile connector
49.0N {-5kgf}
panasonic-electric-works.net/ac