T6963CFG TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC T6963CFG DOT MATRIX LCD CONTROLLER LSI The T6963CFG is an LCD controller designed to be used with LCD control driver LSIs and data display memories. The device has an 8−bit parallel data bus and control lines for reading or writing through an MPU interface. It can be directly connected to a TMPZ−80. It has a 128−word character generator ROM which can control an external display RAM of up to 64 Kbytes. Allocation of text, graphics and external character generator RAM can be made easily and the display window can be moved freely within the allocated memory range. The device supports a very broad range of LCD formats by allowing selection of different combinations via a set of programmable inputs. It can be used in text, graphic and combination text−and−graphic modes, and includes various attribute functions. The T6963CFG is lead (Pb)-free (Sn-Ag) product. Weight: 1.2 g (typ.) Features Display format (pin−selectable) Columns : 32, 40, 64, 80 Lines : 2, 4, 6, 8, 10, 12, 14, 16, 20, 24, 28, 32 The combination of number of columns and number of lines must not cause the frequency to exceed 5.5 MHz. (See Fig. 2) Character font (pin−selectable) Horizontal dots : 5, 6, 7, 8 Vertical dots : 8 (fixed) It is necessary to set a character font in Graphic mode just as in Text mode. The oscillation frequency does not change with the font selection. Display duty : 1 / 16 to 1 / 128 A 128−word character generator ROM (code 0101) T6963CFG−0101 is built in as standard. External display memory : 64 KB Max The addresses in display memory of the text area, graphic area and external character generator area are determined by software. Read or Write operations from the CPU do not disturb the display. A crystal oscillator circuit is built in. The oscillation frequency is adjusted according to the display size. If using an external clock, use the XI pin as the clock input. (XO open.) External capacitors Crystal oscillation : 20 to 30 pF Ceramic oscillation : 30 to 100 pF Built−in feedback resistor : 900 kΩ (typ.) Toshiba LCD driver LSIs (other than these with a built−in RAM) can be connected to the device. External display RAM must be static RAM. The T6963CFG cannot refresh D−RAM. The attribute functions can only be used in Text mode. They cannot be used in Graphic or Combination Character mode. 1 2007-05-15




株式会社 東芝セミコンダクター&ストレージ社






Not pic File
Hot Offer


型式 数量 D/C・lead 備考 選択
T6963C 4個    
T6963C 402個    
T6963C 18個    
T6963C 16個    


型式 数量 D/C・lead 備考 選択
T6963C0101 2209個 92+  
T6963C0101 1159個 94+  
T6963C0101 330個    



見積依頼→在庫確認→見積回答→注文→検収→支払 となります。