GP1S74PJ000F
GP1S74PJ000F
Gap : 5mm Slit : 0.5mm
Phototransistor Output,
Snap-in fixing
Transmissive Photointerrupter with
Connector
■ Description
■ Agency approvals/Compliance
GP1S74PJ000F is a standard, phototransistor output,
transmissive photointerrupter with opposing emitter and
detector in a case, providing non-contact sensing. For
this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow
remote-mount or off-board designs.
1. Compliant with RoHS directive
■ Applications
1. General purpose detection of object presence or motion.
2. Example : PPC, FAX, Printer
■ Features
1. Transmissive with phototransistor output
2. Highlights :
• Special position hooks compatible with 3 different
plate thicknesses (1.0, 1.2, 1.6mm)
• Snap insertion
3. Key Parameters :
• Gap Width : 5mm
• Slit Width (detector side): 0.5mm
• Package : 17×12.8×8mm (without connector and
hooks)
• Connector : Tyco Electronics AMP K.K.
(PN : 292133-3)
4. Lead free and RoHS directive compliant
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1
Sheet No.: D3-A04401EN
Date Oct. 3. 2005
© SHARP Corporation