HEF4543B
BCD to 7-segment latch/decoder/driver
Rev. 6 — 17 November 2011
Product data sheet
1. General description
The HEF4543B is a BCD to 7-segment latch/decoder/driver for liquid crystal and LED
displays. It has four address inputs (D0 to D3), an active LOW latch enable input (LE), an
active HIGH blanking input (BL), an active HIGH phase input (PH) and seven buffered
segment outputs (Qa to Qg).
The circuit provides the function of a 4-bit storage latch and an 8-4-2-1 BCD to 7-segment
decoder/driver. It can invert the logic levels of the output combination. The phase (PH),
blanking (BL) and latch enable (LE) inputs are used to reverse the function table phase,
blank the display and store a BCD code, respectively.
For liquid crystal displays, a square-wave is applied to PH and the electrical common
back-plane of the display. The outputs of the device are directly connected to the
segments of the liquid crystal.
It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS
(usually ground). Unused inputs must be connected to VDD, VSS, or another input.
2. Features and benefits
Fully static operation
5 V, 10 V, and 15 V parametric ratings
Standardized symmetrical output characteristics
Specified from 40 C to +85 C
Complies with JEDEC standard JESD 13-B
3. Ordering information
Table 1.
Ordering information
All types operate from 40 C to +85 C
Type number
Package
Name
Description
Version
HEF4543BP
DIP16
plastic dual in-line package; 16-leads (300 mil)
SOT38-4
HEF4543BT
SO16
plastic small outline package; 16 leads; body width 3.9 mm
SOT109-1
