GP2Y5D91S00F
GP2Y5D91S00F
Distance Measuring Sensor Unit
Digital output (15 mm) type
Capable of operation at high
temperature
■Description
■Agency approvals/Compliance
GP2Y5D91S00F is distance measuring sensor unit,
composed of an integrated combination of PSD
(position sensitive detector), IRED (infrared emitting
diode) and signal processing circuit.
The variety of the reflectivity of the object, the
environmental temperature and the operating duration
are not influenced easily to the distance detection
because of adopting the triangulation method.
The output voltage of this sensor stays high in case
an object exists in the specified distance range. So
this sensor can also be used as proximity sensor.
1. Compliant with RoHS directive (2002/95/EC)
■Applications
1. Touch-less switch
(Sanitary equipment, Control of illumination, etc.)
2. Robot cleaner
■Features
1. Digital output type
2. Short distance type
Detecting distance : Typ. 15 mm
3. Capable of operation at high temperature
Operating temperature : -30 to +105 °C
4. Low profile
Package size : 14.7×9.8×9.3 mm
5. Consumption current : Typ. 7 mA
6. Battery drive compatible
Supply voltage : 2.7 to 6.2 V
7. Sunlight tolerance
Notice
The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: OP14008EN
1