VIPER06
Fixed-frequency VIPer™ plus family
Datasheet — production data
Features
■
800 V avalanche rugged power section
■
PWM operation with frequency jittering for low
EMI
■
Operating frequency:
– 30 kHz for VIPER06Xx
– 60 kHz for VIPER06Lx
– 115 kHz for VIPER06Hx
SSO10
Figure 1.
■
Standby power < 30 mW at 265 VAC
■
Limiting current with adjustable set point
■
On-board soft-start
■
Safe auto-restart after a fault condition
■
Typical application
No need for an auxiliary winding in low-power
applications
■
DIP-7
Hysteretic thermal shutdown
Applications
■
Replacement of capacitive power supplies
■
Home appliances
■
Power metering
■
LED drivers
Description
The VIPER06 is an offline converter with an 800 V
avalanche rugged power section, a PWM
controller, a user-defined overcurrent limit, openloop failure protection, hysteretic thermal
protection, soft startup and safe auto-restart after
any fault condition. The device is able to power
itself directly from the rectified mains, eliminating
the need for an auxiliary bias winding. Advanced
frequency jittering reduces EMI filter cost. Burst
mode operation and the device’s very low power
consumption both help to meet the standards set
by energy-saving regulations.
March 2012
This is information on a product in full production.
Doc ID 022794 Rev 1
1/28
www.st.com
28
