E/H (Military M/D55342)
Vishay Thin Film
QPL MIL-PRF-55342 Qualified Thin Film Resistor Chips
FEATURES
• Established reliability, “R” failure rate level (100 ppm), C = 2
SURFACE MOUNT
CHIPS
• High purity alumina substrate 99.6 % purity
• Wraparound termination featuring a tenacious adhesion
layer covered with an electroplated nickel barrier layer for
+ 150 °C operating conditions
Actual Size
M55342/02
• Very low noise and voltage coefficient
(< - 25 dB, 0.5 ppm/V)
Thin Film Mil chip resistors feature all sputtered wraparound
termination for excellent adhesion and dimensional
uniformity. They are ideal in applications requiring stringent
performance requirements. Established reliability is assured
through 100 % screening and extensive environmental lot
testing. Wafer is sawed producing exact dimensions and
clean, straight edges.
Note
• Specification changed
MIL-PRF-55342
by
DSCC
from
MIL-R-55342
• Non-inductive
• Laser-trimmed tolerances ± 0.1 %
• Wraparound resistance less than 0.010 Ω typical
• In-lot tracking less than 5 ppm/°C
• Complete MIL-testing available in-house
• Antistatic waffle pack or tape and reel packaging available
to
• Military/aerospace/QPL
CONSTRUCTION
TYPICAL PERFORMANCE
ABS
Passivation
Resistor film
TCR
25
TOL.
Solder
coating
0.1
Nickel barrier
High purity
alumina substrate
Adhesion layer
STANDARD ELECTRICAL SPECIFICATIONS
Test
Material
Absolute TCR
SPECIFICATIONS
CONDITIONS
Passivated nichrome
± 25 ppm/°C to ± 300 ppm/°C TCR
- 55 °C to + 125 °C
Absolute Tolerance
± 0.1 %
+ 25 °C
Stability: ΔR Absolute
± 0.1 %
2000 h at + 70 °C
Voltage Coefficient
± 0.5 ppm/V
Operating Temperature Range
- 55 °C to + 125 °C
Storage Temperature Range
- 55 °C to + 150 °C
Noise
Shelf Life Stability
www.vishay.com
50
- 25 dB
100 ppm
For technical questions, contact: thin-film@vishay.com
1 year at + 25 °C
Document Number: 60018
Revision: 14-Oct-09