Ordering information
AC-DC Power Supplies PCB Mount type
YW5
Y
1
W
2
5
3
12A
4
1Series name
2Dual output
3Output wattage
4Output voltage
R
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
*1
YW512A
5.28
t12V 0.22A or +24V 0.22A
YW515A
5.10
t15V 0.17A or +30V 0.17A
YW512A
AC85 - 132 1f or DC110 - 170
0.15typ (Io=100%)
47 - 440 or DC
70typ (Io=100%)
15typ (Io=100%)
t12 (+24)
YW515A
SPECIFICATIONS
INPUT
OUTPUT
Y
PROTECTION
CIRCUIT
ISOLATION
ENVIRONMENT
SAFETY AND
NOISE
REGULATIONS
*1
*2
*
*
Y-8
MODEL
VOLTAGE[V]
ACIN 100V
CURRENT[A]
FREQUENCY[Hz]
EFFICIENCY[%] ACIN 100V
INRUSH CURRENT[A] ACIN 100V
VOLTAGE[V]
CURRENT[A]
LINE REGULATION[mV]
LOAD REGULATION[mV]
*2
RIPPLE[mVp-p]
RIPPLE NOISE[mVp-p] *2
TEMPERATURE REGULATION[mV] 0 to +55C
START-UP TIME[ms]
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
OUTPUT VOLTAGE SETTING[%]
HOLD-UP TIME[ms]
OVERCURRENT PROTECTION
INPUT-FG, OUTPUT
OUTPUT-FG
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
VIBRATION
IMPACT
AGENCY APPROVALS
CONDUCTED NOISE
t15 (+30)
0.22
0.17
60max
75max
600max
750max
120max
120max
150max
150max
150max
180max
200max (ACIN 85V, Io=100%)
Fixed
t5max (Rated input/output, Ta=25 C)
10typ (ACIN 85V, Io=100%)
Works over 105% of rating and recovers automatically
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature)
AC500V 1minute, Cutoff current = 100mA, DC500V 50MWmin (At Room Temperature)
-10 to +70C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
-20 to +75C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max
10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 30minutes each along X, Y and Z axis
490.3m/s2 (50G), 11ms, once each X, Y and Z axis
UL60950-1, C-UL
Complies with FCC-B
Output pins can be connected in series to make a 24V/30V output.
Measured by 20MHz oscilloscope.
The output specification is at t12V and t15V.
Parallel operation with other model is not possible.