Single-Channel, 12-/16-Bit, Serial Input, 4 mA to
20 mA, Current Source DAC, HART Connectivity
AD5410/AD5420
Data Sheet
FEATURES
GENERAL DESCRIPTION
12-/16-bit resolution and monotonicity
Current output ranges: 4 mA to 20 mA, 0 mA to 20 mA, or
0 mA to 24 mA
±0.01% FSR typical total unadjusted error (TUE)
±3 ppm/°C typical output drift
Flexible serial digital interface
On-chip output fault detection
On-chip reference (10 ppm/°C maximum)
Feedback/monitoring of output current
Asynchronous clear function
Power supply (AVDD) range
10.8 V to 40 V; AD5410AREZ/AD5420AREZ
10.8 V to 60 V; AD5410ACPZ/AD5420ACPZ
Output loop compliance to AVDD − 2.5 V
Temperature range: −40°C to +85°C
24-lead TSSOP and 40-lead LFCSP packages
The AD5410/AD5420 are low cost, precision, fully integrated
12-/16-bit converters offering a programmable current source
output designed to meet the requirements of industrial process
control applications. The output current range is programmable
at 4 mA to 20 mA, 0 mA to 20 mA, or an overrange function of
0 mA to 24 mA. The output is open-circuit protected. The device
operates with a power supply (AVDD) range from 10.8 V to
60 V. Output loop compliance is 0 V to AVDD − 2.5 V.
The device also includes a power-on reset function, ensuring
that the device powers up in a known state, and an asynchronous
CLEAR pin that sets the output to the low end of the selected
current range.
APPLICATIONS
The total unadjusted error is typically ±0.01% FSR.
Process control
Actuator control
PLC
HART network connectivity
COMPANION PRODUCTS
The flexible serial interface is SPI, MICROWIRE™, QSPI™, and
DSP compatible and can be operated in 3-wire mode to minimize the digital isolation required in isolated applications.
HART Modem: AD5700, AD5700-1
FUNCTIONAL BLOCK DIAGRAM
DVCC
SELECT
CAP1
DVCC
CAP2
AV DD
R3SENSE
AD5410/AD5420
R2
R3
CLEAR
INPUT SHIFT
REGISTER
AND CONTROL
LOGIC
POWERON
RESET
12/16
IOUT
12-/16-BIT
DAC
FAULT
RSET
VREF
RSET
REFOUT
REFIN
GND
07027-001
LATCH
SCLK
SDIN
SDO
BOOST
Figure 1.
Rev. J
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2009–2017 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com