Basic Specification for SS6 N1 Series
SOC product name
SS6 “Rated current” N1
Certification
UL198G Listed
UL198G Recognized
Rated currents 5.1 A–8 A
Rated currents 8.1 A–15 A
CSA C22.2 No. 59.2 Certified
Rated currents 5.1 A–15 A
Conformity Test Certificate specified at Clause 9 of
Rated currents 5.1 A–15 A
the Electrical Appliance and Material Safety Law
(EAMSL) of Japan has been issued by JET
(Japan Electrical Safety & Environment Technology Laboratories).
Dimensions and construction
(mm)
Marking
Marking ①:
Marking ①:
Electrical characteristics
CertifiRated
Rated
current (IN)
cation
voltage
UL
CSA
Temperature
rise
Rated breaking
current
250V “Rated current”
125V “Rated current”
Current carrying
capacity
1.1 IN for not
less than
15 min after
temperature
stabilization.
200 A
Not more than
70 K at 1.1 IN
100 A
At 1.1 IN,
not more than
140 K at the
center, and not
more than 60 K
at the contact.
1.1 IN until
constant
temperature is
obtained on
each part.
10000 A
AC 250 V
Not more than
70 K at 1.0 IN
1.0 IN for not
less than
15 min after
temperature
stabilization.
500 A
At 1.1 IN,
not more than
140 K at the
center, and not
more than 60 K
at the contact.
PF=
0.7–0.8
UL
CSA
AC 125 V
Overload
operation
1.1 IN until
constant
temperature is
obtained on
each part.
5.1 A–8 A
E
JET
E
JET
Marking ②:
Marking ②:
SOC SS6
SOC SS6
8.1 A–15 A
The information in this specification shall be subject to change without notice.
Within 60 min
at 1.35 IN
Within 2 min
at 2.0 IN
June 17, 2015
