Snap Action Switch
V
General Purpose Snap Action Switch
• Industry standard design with switching currents of 10A to 21A
• Widely used for applications where long life expectancy and
high reliability is required.
• Choose from a variety of levers, terminals and operating forces.
• Right and Left Barrier options are available for the V-21 and
V-16 models
• Heat resistant versions of the V-15 and V-10 are available.
• RoHS Compliant
Ordering Information
■ Model Number Legend
V-
1 2 3
1.
2.
3.
4 5 6 7
Ratings
21:
21 A at 250 VAC
16:
16 A at 250 VAC
15:
15 A at 250 VAC
11:
11 A at 250 VAC
10:
10 A at 250 VAC
Contact Gap
None: 1 mm (F gap)
G:
0.5 mm (G gap)
Actuator
None: Pin plunger
1:
Short hinge lever
2:
Hinge lever
3:
Long hinge lever
4:
Simulated roller lever
5:
Short hinge roller lever
6:
Hinge roller lever
8
9
4. Contact Form
COM Terminal, Bottom position:
1:
SPDT
2:
SPST-NC
3:
SPST-NO
COM Terminal, Side position:
4:
SPDT
5:
SPST-NC
6:
5.
7.
Note: These OF values are for
the pin plunger models.
8.
Special Purpose
None: Standard
T:
Heat resistive
(V-15 and V-10, only)
SPST-NO
Terminals
A:
Solder terminals
C2:
Quick-connect terminal (#187)
C:
Quick-connect terminal (#250)
Maximum Operating Force
6:
400 gf
5:
200 gf
4:
100 gf
9.
Mounting Hole Size
None: 3.1 mm
K:
2.9 mm
6. Insulation Barrier
None: Without Barrier
R:
Right-hand barrier
L:
Left-hand barrier
(Barriers available for V-21 and V-16, only)
Note: Consult Omron regarding nomenclature combinations and part numbers
not found in this datasheet.
Snap Action Switch
V
121