MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
KY
Low impedance, 105℃
KZH
Series
Lower Z
●Newly
innovative electrolyte is employed to minimize ESR
●Endurance with ripple current : 4,000 to 10,000 hours at 105℃
●Non solvent resistant type
●RoHS Compliant
KZE
Lower Z
KY
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-40 to +105℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
6.3 to 100Vdc
±20% (M)
(at 20℃, 120Hz)
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃ after 2 minutes)
6.3V 10V 16V 25V 35V 50V 63V 80V 100V
Rated voltage (Vdc)
0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08
tanδ (Max.)
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
(at 20℃, 120Hz)
6.3V 10V 16V 25V 35V 50V 63V 80V 100V
Rated voltage (Vdc)
4
3
2
2
2
2
2
2
2
Z(-25℃)/Z(+20℃)
8
6
4
3
3
3
3
3
3
Z(-40℃)/Z(+20℃)
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃.
φ5 & 6.3 : 4,000hours φ8 & 10 : 6,000hours φ12.5 to 18 : 8,000hours
6.3 to 10Vdc
Time
φ5 & 6.3 : 5,000hours φ8 & 10 : 7,000hours φ12.5 to 18 : 10,000hours
16 to 100Vdc
Capacitance change
≦±25% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±25% of the initial value
≦200% of the initial specified value
D.F. (tanδ)
Leakage current
≦The initial specified value
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
◆DIMENSIONS [mm]
φD'
φ
d
Sleeve (PET : Brown)
F±0.5
Code : E
F±0.5
●Terminal
φD
φd
F
φD'
L'
Vent
(Exceptφ5 &φ6.3)
15min.
4min.
L'
(φ5 to φ
10)
5
0.5
2.0
6.3
0.5
2.5
10 12.5
8
0.6 0.6 0.6
3.5 5.0 5.0
φD+0.5max.
L+1.5max.
16
0.8
7.5
18
0.8
7.5
(φ12.5 to φ
18)
Gas escape end seal
◆PART NUMBERING SYSTEM
1
2
3
4
E KY-
5
6
7
8
E
9
10
11
12
13
14
15
16
17
18
M
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 1.0µF:1R0,10µF:100,100µF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3,50V:500)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/3)
CAT. No. E1001M