Aluminum Electrolytic Capacitors/HA
Snap-in Type
Series: HA
n Features
Type :
Country of Origin
TS
Japan
Malaysia
U.S.A (ii)
Endurance: 105°C 2000 h
Dia.
20 mm
Length 20 mm
n Recommended Applications
(ii) Regarding USA product,
Please check ACOM's
Catalog.
Smoothing circuits, AC adaptor
n Specifications
Category temp. range
-40 to + 105°C
10 to 100 V .DC
Nominal Cap. Range
Capacitance Tolerance
-40 to + 105°C
160 to 250 V .DC
-25 to + 105°C
315 to 400 V .DC
330 to 68000 µ F
Rated W.V. Range
68 to 470 µ F
±20 % (120Hz/+20°C)
33 to 120 µ F
3√CV (µA) max. after 5 minutes application of rated working voltage at +20°C.
C:Capacitance(µF) V: W.V. (V.DC)
DC Leakage Current
tan δ
Frequency Correction
Factor for Ripple Current
Please see the attached standard products list
Frequency (Hz)
50
60
100
0.93
0.75
10 to 100V
160 to 400V
0.95
0.80
120
1.00
0.99
0.95
500
1.05
1.00
1.20
1k
1.08
10k to
1.15
1.25
1.40
After 2000 hours application of DC voltage with specified ripple current (< rated DC working
voltage) at +105°C, the capacitor shall meet the following limits.
Endurance
Capacitance change ±20 % of initial measured value
< 200 % of initial specified value
tan δ
DC leakage current < initial specified value
After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Shelf Life
n Dimensions in mm (not to scale)
φD+1.0 max
Polarity bar
(10.0) 2-φ2.0±0.1
Sleeve
10.0±0.1
Vent
L+2.0 max
Recommended PWB piercing plan
i
+0.2
0.8 - 0.1
2.0 max
Terminal
(t= 0.8)
(3.5)
4.0±0.5
i
Bottom of can
1.5 ± 0.2
Standard terminal type does not require
terminal trimming process.
i 6.3 mm is available upon request.
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.
Mar. 2005
EE158
