3M™ SIP Socket
Screw Machine, Low Profile
500 Series
Standard 32 pin strip can be cut to length
Reliable four finger contact interface
Lower contact point enables lower total profile
Inner contact aligned to maximize contact
surface area
• Can be used in pairs to simulate DIP
configuration
• Side and end stackable for board and design
flexibility
• RoHS* compliant
ED
•
•
•
•
TS-2119-B
Sheet 1 of 2
U
Date Modified: August 8, 2008
N
Glass Filled Polyester
UL 94V-0
Black
C
O
Brass
Beryllium Copper
100 μ″ [ 2.54 μm ] min. Nickel
8 μ″ [ .02 μm ] min. Gold
Gold flash (RoHS compliant)
D
IS
Insulation Material:
Flammability:
Color:
Contact Material:
Sleeve:
Inner contact:
Plating Underplating:
Wiping Area:
Terminal Area:
Mating Device Leads
TI
N
Physical
Rectangular Lead: W 0.38~0.50 mm X T 0.20~0.40 (0.50 mm max. Diagonal)
Circular Lead: ø 0.40~0.50 mm
Length: 1.8 mm min.
Marking: None
Electrical
Current Resistance: < 25mΩ
Current Rating: 1 A
Insulation Resistance: 1,000 MΩ at 500 VDC
Withstanding Voltage: 1000 VAC rms for 1 minute
Environmental
Temperature Rating: -65°C to +125°C
Process Rating: 260°C max. for 5 seconds, (Dipping: One time) Not for reflow soldering.
*"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury,
hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by
3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
