Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
EMIFILr (Inductor type)
1
Chip Ferrite Bead
BLM15P Series (0402 Size)
I Dimensions
I Equivalent Circuit
0.5±0.05
0.25±0.1
1.0±0.05
0.5±0.05
(Resistance element becomes dominant
at high frequencies.)
: Electrode
(in mm)
I Packaging
Code
Packaging
Minimum Quantity
D
180mm Paper Tape
10000
J
330mm Paper Tape
50000
B
Bulk(Bag)
1000
I Rated Value (p: packaging code)
Impedance
(at 100MHz/20°C)
Impedance
(at 1GHz/20°C)
Rated Current
DC Resistance (max.)
Operating
Temperature Range
BLM15PG100SN1p
10ohm(Typ.)
-
1000mA
0.05ohm
-55 to +125°C
BLM15PD300SN1p
30ohm±25%
-
2200mA
0.035ohm
-55 to +125°C
BLM15PD600SN1p
60ohm±25%
-
1700mA
0.06ohm
-55 to +125°C
BLM15PD800SN1p
80ohm±25%
-
1500mA
0.07ohm
-55 to +125°C
BLM15PD121SN1p
120ohm±25%
-
1300mA
0.09ohm
-55 to +125°C
Part Number
Number of Circuits: 1
Continued on the following page.
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.3.4
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
3
Continued from the preceding page.
I !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.3.4
http://www.murata.com/