MC14060B
14−Bit Binary Counter and
Oscillator
The MC14060B is a 14−stage binary ripple counter with an on−chip
oscillator buffer. The oscillator configuration allows design of either
RC or crystal oscillator circuits. Also included on the chip is a reset
function which places all outputs into the zero state and disables the
oscillator. A negative transition on Clock will advance the counter to
the next state. Schmitt trigger action on the input line permits very
slow input rise and fall times. Applications include time delay circuits,
counter controls, and frequency dividing circuits.
This device contains protection circuitry to guard against damage due
to high static voltages or electric fields. However, precautions must be
taken to avoid applications of any voltage higher than maximum rated
voltages to this high−impedance circuit. For proper operation, Vin and
Vout should be constrained to the range VSS v (Vin or Vout) v VDD.
Unused inputs must always be tied to an appropriate logic voltage
level (e.g., either VSS or VDD). Unused outputs must be left open.
http://onsemi.com
MARKING
DIAGRAMS
PDIP−16
P SUFFIX
CASE 648
•
•
•
•
Value
16
1
16
SOEIAJ−16
F SUFFIX
CASE 966
V
MC14060B
AWLYWW
1
V
−0.5 to VDD
+0.5
14
060B
ALYW
TSSOP−16
DT SUFFIX
CASE 948F
Unit
−0.5 to +18.0
14060B
AWLYWW
1
MAXIMUM RATINGS (Voltages Referenced to VSS)
Parameter
1
16
Fully Static Operation
Diode Protection on All Inputs
Supply Voltage Range = 3.0 V to 18 V
Capable of Driving Two Low−power TTL Loads or One Low−power
Schottky TTL Load Over the Rated Temperature Range
Buffered Outputs Available from Stages 4 Through 10 and
12 Through 14
Common Reset Line
Pin−for−Pin Replacement for CD4060B
Pb−Free Packages are Available*
Symbol
MC14060BCP
AWLYYWW
SOIC−16
D SUFFIX
CASE 751B
Features
•
•
•
•
16
VDD
DC Supply Voltage Range
Vin,
Vout
Input or Output Voltage Range
(DC or Transient)
Iin,
Iout
Input or Output Current
(DC or Transient) per Pin
± 10
mA
PD
Power Dissipation, per Package
(Note 1)
500
mW
TA
Ambient Temperature Range
−55 to +125
°C
Tstg
Storage Temperature Range
−65 to +150
°C
TL
Lead Temperature (8 Second Soldering)
260
°C
A
WL, L
YY, Y
WW, W
= Assembly Location
= Wafer Lot
= Year
= Work Week
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. Temperature Derating: Plastic “P and D/DW” Packages: –7.0 mW/°C from
65°C To 125°C.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2005
February, 2005 − Rev. 7
1
Publication Order Number:
MC14060B/D
