Axial Leaded Precision Resistors
Type HOLCO Series
Key Features
I
Ultra Precision Down To 0.05%
I
Matched Sets Available
To 2ppm/°C
I
High Pulse Withstand
I
Low Reactance
I
Low TCR - Down
To 5ppm/°C
I
Long Term Stability
I
Up To 1 Watt At 70°C
I
Released To CECC 40101
004, 030 And 804
The Holco range of Precision Metal Film Resistors meets the requirement for economically
priced components for industrial and military applications. The manufacturing facility
utilises closely controlled production processes including the sputter coating of metal alloy
films to ceramic substrates, and laser spiralling to achieve close tolerance and high
stability resistors. An epoxy coating is applied for environmental and mechanical
protection. Commercially the Series is available in two case sizes, from 1 ohm to
4M ohms, tolerances from 0.05% to 1% and TCR's from 5ppm/°C to 100ppm/°C. Offered
with release to BS CECC 40101 004, 030 and 804 the H8 is available via distribution.
Characteristics - Electrical
H4P
H4
H8
BS CECC 40101 004
Style:
K
H
J
0.25W
Power Rating at 70°C:
0.063W
0.125W
Temperature Rise (max):
32°C
14°C
28°C
Limiting Element Voltage:
250V
200V
200V
BS CECC 40101 030
Style:
J
H
0.125W
Power Rating at 125°C:
0.1W
Temperature Rise (max):
30°C
30°C
Limiting Element Voltage:
250V
200V
BS CECC 40101 804
Style:
B
A
Power Rating at 125°C:
0.25W
0.125W
Limiting Element Voltage:
250V
200V
0.25W
Commercial Ratings
Power Rating at 70°C:
1.0W
0.5W
Temperature Rise:
70°C
55°C
40°C
Limiting Element Voltage:
500V
350V
350V
General Data
Lead Material:
Conformal Epoxy Coating
Resistor Marking:
Legend printed in accordance with CECC 40000 Para 2.4
Solvent Resistance:
1773230 CIS BI 06/2011
Solderability to BS CECC 40101 004 Para 4.15.1
Encapsulation:
The epoxy coating and print will withstand the action of all commonly
used industrial cleansing solvents
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to: te.com/help
Axial Leaded Precision Resistors
Type HOLCO Series
Dimensions
To prevent damage to the components conformal coating, the leads should be adequately supported during the
forming process
H4P
H4
H8
Body Length (L) maximum:
10.0 mm
10.0 mm
7.20 mm
Body Diameter (D) maximum:
3.70 mm
3.70 mm
2.50 mm
Lead Diameter (d) maximum:
0.60 mm
0.60 mm
0.60 mm
Lead Length (l) nominal:
30.0 mm
30.0 mm
30.0 mm
Recommended Mounting Pitch:
12.7 mm
12.7 mm
10.2 mm
40
40
24
Weight (g/100 resistors)
Characteristics Long Term Stability
Long Term Stability
BS CECC 40101 004
Ratings at 70°C
H4 - 0.25 W
H8 - 0.125 W
Long Term Stability
Commercial
Ratings at 125°C
H4P - 1W
H4 - 0.5 W
H8 - 0.25 W
1773230 CIS BI 06/2011
Long Term Stability
BS CECC 40101 030
Ratings at 125°C
H4 - 0.125 W
H8 - 0.1 W
Damp Heat Steady State
93% RH at 40°C
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to: te.com/help