Metal Shell Circular Connectors
HS Series
Introduction
·
The HS series is generally called “metal connector”,
and is the most widely used standard multi-pin
circular connector.
·
Being sturdy and simple in construction, the HS
connectors are stable mechanically and electrically
and are employed by NTT and set manufacturers
as standard parts.
Material
Part
Material
Finish
Shell
Copper compound metal
Nickel plated
Insulator
Synthetic resin
-----------------
Male contacts
Brass
Female contacts
Brass or phosphor bronze
Nickel plated
Ordering information
HS 21 P A - 2 A
q
w
e
r
t
y
qModel name: HS stands for HIROSE STANDARD.
wShell size:
The shell size is expressed as the outside diameter of the plug fitting section (insulator)
with seven types: 12, 14, 16, 21, 25, 28 and 35.
eShell type: The shell is classified into the following types.
P : Plug
R : Receptacle
J : Jack
RC : Receptacle cap
rShell model change mark: Each time the shell undergoes a model change, it is marked as A, B or C.
tNumber of contacts
y ontact arrangement change mark: When the contact fitting section or contact arrangement undergoes a change,
C
it is marked as A, B, C....after the number of contacts.
2014.12w
1