Catalog 1308242
Issued 3-03
AXICOM
FX2 series
DPDT Slim Package
Telecom/Signal PC Board Relays
File E111441
File 176679-1079886
16504-002
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Coil Data @ 23°C
Features
• Through hole PC board terminals.
• Meets Bellcore GR 1089 and FCC Part 68.
• For applications in telecommunications, office automation, consumer
electronics, medical equipment, measurement and control equipment.
• Immersion cleanable, plastic sealed case.
• 80mW coil for high sensitivity models, 140mW coil for sensitive types.
• Ultrasonic cleaning not recommended.
Contact Data @ 23°C (except as noted)
Arrangement: 2 Form C (DPDT) bifurcated contacts.
Material: Stationary: Palladium-ruthenium.
Ratings: Max. Switched Current: 2A.
Max. Carry Current: 2A (at max ambient temperature.)
Max. Switched Voltage: 220VDC, 250VAC.
Max. Switched Power: 60W DC or 62.5VA AC.
UL/CSA Ratings: 300mA @ 110VDC; 1A @ 30VDC;
500mA @ 120VAC; 250mA @ 240VAC.
Initial Contact Resistance: <70 milliohms @ 10mA / 20mV.
Expected Mechanical Life: 100 million operations.
Expected Electrical Life: 2.5 million operations @ 10mA / 30mVDC.
2 million operations @ cable load open end.
500,000 operations @ 250mA / 125VDC.
500,000 operations @ 1.25A / 24VDC.
500,000 operations @ 2A / 30VDC.
Thermoelectric potential: <10µV.
High Frequency Data
Capacitance: Between Open Contacts: 2pF, max.
Between Coil and Contacts: 4pF, max.
Between Poles: 2pF, max.
RF Characteristics: Isolation at 100 / 900 MHz: -34.0 db / -15.1 db.
Insertion loss at 100 / 900 MHz: -0.03 db / -0.60 db.
V. S. W. R. at 100 / 900 MHz: 1.07 / 1.45 .
Initial Dielectric Strength
Between Open Contacts: 1,800Vrms for 1 minute.
Between Coil and Contacts: 1,800Vrms for 1 minute.
Between Poles: 1,800Vrms for 1 minute.
Surge Voltage Resistance per Bellcore GR1089 (2 / 10 µs) and FCC 68
(10 / 160 µs):
Between Open Contacts: 2,500V.
Between Coil and Contacts: 3,500V.
Between Poles: 2,500V.
Initial Insulation Resistance
Between Contact and Coil: 109 ohms or more @ 500VDC.
Coil Data @ 23°C
Voltage: 3 to 48VDC.
Nominal Power: 80-300mW, depending on model. See coil data tables.
Duty Cycle: Continuous.
Nom. Operate/Set Range
Minimum
Nom.
Voltage
Min.
Max. Release/Reset Power
(VDC) Voltage
Voltage
Voltage
(mW)
(VDC)
(VDC)
(VDC)
Non-latching 1 coil versions
3
2.1
6.8
0.3
140
4
2.8
7.6
0.4
140
4.5
3.15
10.3
0.45
140
5
3.5
11.4
0.5
140
6
4.2
13.7
0.6
140
9
6.3
20.4
0.9
140
12
8.4
27.3
1.2
140
24
16.8
45.7
2.4
200
48
33.6
67.5
4.8
300
Non-latching, sensitive 1 coil versions
3
2.25
9.0
0.3
80
4.5
3.38
13.5
0.45
80
5
3.75
15.0
0.5
80
6
4.5
18.0
0.6
80
9
6.75
27.1
0.9
80
12
9.0
36.1
1.2
80
24
18.0
54.7
2.4
140
48
36.0
72.5
4.8
260
Latching 1 coil versions
3
2.25
8.1
-2.25
100
4.5
3.375
12.1
-3.375
100
5
3.75
13.5
-3.75
100
6
4.5
16.2
-4.5
100
9
6.75
24.2
-6.75
100
12
9.0
29.0
-9.0
100
24
18.0
47.5
-18.0
150
Resistance
±10%
(Ohms)
Part
Number
64
114
145
178
257
574
1,028
2,880
7,680
D3206
D3207
D3204
D3209
D3205
D3210
D3202
D3212
D3213
113
253
313
450
1,013
1,800
4,114
8,882
D3221
D3222
D3223
D3224
D3225
D3226
D3227
D3228
90
203
250
360
810
1,440
3,840
D3241
D3242
D3243
D3244
D3245
D3246
D3247
Operate Data @ 23°C
Operate and Release Voltage: See values in chart above.
Operate Time (at nominal voltage): 3 ms, typ.; 4 ms, max.
Reset Time [latching](at nominal voltage): 3 ms, typ.; 4 ms, max.
Release Time [non-latching](w/o diode in parallel): 1 ms, typ.; 3 ms, max.
Release Time [non-latching](with diode in parallel): 3 ms, typ.; 4 ms, max.
Bounce Time (at contact close): 1 ms, typ.; 5 ms, max.
Maximum Switching Rate (no load): 50 operations/s.
Environmental Data
Temperature Range: -55°C to +85°C.
Maximum Allowable Coil Temperature: 110°C.
Thermal Resistance: < 185K/W.
Shock, half sinus, 11 ms: Functional: 50g.
Shock, half sinus, 11 ms: Destructive: 1,500g.
Vibration, 10-500 Hz.: Functional: 20g.
Needle Flame Test: Application Time 20s.
Resistance to Soldering: 260°C for 10s.
Mechanical Data
Termination: Through-hole printed circuit terminals.
Mounting Position: Any.
Enclosure Type: Immersion cleanable (IP67) plastic case.
Weight: 0.10 oz. (2.5g) approximately.
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
329
Refer to inside back cover.