page 1/4
Screw Connectors for Printed Circuit Boards
974 (-DS) | 5.00 mm (0.197 in) Spacing - 2-26 poles
PICTURES
974-DS
TECHNICAL INFORMATION
Description
Can be installed anywhere on PCB without wires or screws interfering with the rest of PCB. Can be located next to each other back-to-back,
front-to-front and front-to-back. The screws and wire entries are easily visible, accessible and usable, an ergonomic advantage.
Wire entrance at 45 angle to PC Board
Solid version
End-to-end stackable while maintaining the 5 mm spacing.
Technical Data
Center to Center Spacing: 5.000 mm (0.197 in)
Nominal Cross Section: 2.5 mm2 (3875 mils2)
Wire Stripping Length: 6.500 mm (0.256 in)
Recommended Hole Diameter in PC Board: 1.300 mm (0.051 in)
Bill of Materials
Pole Version : 2-8
Molding : Polyamide, Self extinguishing UL 94, V-0
Color : Grey
Temperature limits :
Short Time : 140°C (284°F)
Continuous : 105°C (221°F)
Low Limit : -40°C (-40°F)
Comparative Tracking Index : CTI ? 600 V
Oxygen Index Rating : 32 %
Terminal Body: Tin plated copper alloy
: Tin plated copper alloy
Screw: Slotted head, zinc plated clear passivated, steel substrate M3
Solder Pin: Tin plated copper alloy 1.0 mm (0.04 in.)