Plastic Film Capacitors
Stacked Metallized PPS Film Chip Capacitor
Type:
ECHU(X)
Stacked metallized PPS film as dielectric with simple
mold-less construction
■Features
• Small in size (minimum size 1.6 mm ✕ 0.8 mm)
• 85 ˚C, 85 %RH, W.V. ✕ 1.0 for 500 hours
• For reflow soldering
• RoHS directive compliant
■Recommended Applications
• Time-constant
• Filtering
• Oscillation and resonance
■Explanation of Part Numbers
1
2
3
4
E
C
H
U
Product code
Dielectric &
construction
5
6
7
8
9
10
11
X
Rated voltage
Capacitance
Cap. Tol. Suffix
G ±2 %
J ±5 %
1C 16 VDC
1H 50 VDC
■Specifications
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage
12
Suffix
Tape width
Reel diameter ❈ Tape width 8 mm
and diameter
8 mm
5
size ø180 mm ø330 mm reel is
prepared.
12 mm
9
size ø330 mm
−55 ℃ to +125 ℃
16 VDC,50 VDC
(50 VDC: 0.12 µF or more: Derating or rated voltage by 1.25 % / ℃at more than 105 ℃)
Capacitance range
0.00010 µF to 0.22 µF (E12)
Capacitance tolerance
±2 %(G), ±5 %(J)
Withstand voltage
Between terminals : Rated volt. (VDC)✕150 % 60 s
Dissipation factor (tan )
tanδ≦0.6 % (20 ℃, 1 kHz)
16 VDC:IR≧3000 MΩ (20 ℃, 10 VDC, 60 s)
50 VDC:IR≧3000 MΩ (20 ℃, 50 VDC, 60 s)
Insulation resistance (IR)
Soldering conditions
Reflow soldering : 260 ˚C max. and 95 sec max. at more than 220 ˚C (Temp. at cap. surface)
❈ Please consult us for flow soldering
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please
refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
■Construction
■Dimensions in mm (not to scale)
saize
code
L
W
H
e
g
K1
1.6
0.8
0.7
0.35
≧0.4
J1
J2
H1
2.0
2.0
3.2
1.25
1.25
1.6
0.9
1.1
0.9
0.45
0.45
0.65
≧0.6
≧0.6
≧1.0
H2
H3
3.2
3.2
1.6
1.6
1.1
1.5
0.65
0.65
≧1.0
≧1.0
G1
G2
G3
3.2
3.2
3.2
2.5
2.5
2.5
1.1
1.5
2.1
0.65
0.65
0.65
≧1.0
≧1.0
≧1.0
E1
E2
4.8
4.8
3.3
3.3
1.5
2.1
0.80
0.80
≧2.0
≧2.0
D1
D3
D4
6.0
6.0
6.0
4.1
4.1
4.1
1.9
2.5
2.8
0.80
0.80
0.80
≧2.0
≧2.0
≧2.0
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.