Aluminum Electrolytic Capacitor/FA
Radial lead type
Series:
FA
s Features
Type :
Discontinued
A
Endurance :105°C 2000 to 5000h
Smaller than Series HFQ
Low impedance (20 to 40 less volume than
Series HFQ)
sSpecification
-55 to + 105°C
6.3 to 63 V .DC
Operating Temp. Range
Rated W.V. range
Nominal cap. range
68 to 15000 µ F
±20 % (120Hz/+20°C)
Capacitance tol.
DC leakage current
I < 0.01 CV (µ A) after 2 minutes application of rated working voltage at +20°C.
W.V. 6.3
10
16
25
35
50 63
tan δ 0.22 0.19 0.16 0.14 0.12 0.10 0.08
tan δ
(max.)
(120Hz /+20°C)
Add 0.02 per 1000µF for products of 1000µF or more.
Impedance at -10°C, 100KHz <200 % of initial specified value at 20°C,100kHz.
(Impedance ratio at 100kHz)
After following life test with DC voltage and +105 ±2°C ripple current value applied (The sum of
DC and ripple peak voltage shall not exceed the rated working voltage),the capacitors shall meet
the limits specified below.
Duration: 2000 hours (φ8), 3000 hours (φ10), 5000 hours (φ12.5 to φ18) Post test requirements at
20°C.
Characteristics
at Low Temperature
Endurance
Capacitance change < ±20% of initial measured value
< 200% of initial specified value
tan δ
DC leakage current < initial specified value
After storage for 1000 hours at +105± 2°C with no voltage applied and then being stabilized at
+20°C,capacitor shall meet the limits specified in “Enduramce”.
Shelf life
sExplanation of Part Numbers
E
E
U
Product code
F
A
Series code
N.Capacitance code
R.W.V. code
Option
s Dimensions in mm (not to scale)
Vinyl sleeve
(mm)
φ8>
φ10<
φd±0.05
P± 0.5
P± 0.5
Safety vent
L
14 min
L <16:L+1.0 max
L >20:L+2.0 max
Body Dia. φD
8
φD+0.5 max
min
10
12.5
16
< 25
Body Length L
φD+0.5 max
18
> 30
Lead Dia. φd
0.6
0.6
0.6
0.8
0.8
0.8
Lead space P
3.5
5
5
5
7.5
7.5
s Frequency correction factor for ripple current
W
(V.DC)
6.3 to 63
Cap.(µF)
6.8 to 330
390 to 1000
1200 to 2200
2700 to 15000
Frequency(Hz)
60
0.55
0.70
0.75
0.80
120
0.65
0.75
0.80
0.85
1k
0.85
0.90
0.90
0.95
10k
0.90
0.95
0.95
1.00
100k
1.0
1.0
1.0
1.0
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
Mar. 2005
– EE23 –