Models M83401/04, 05, 06, 07, 08, 09; C & G Schematics
Vishay Techno
QPL MIL-PRF-83401 Qualified, Single-In-Line
Resistor Networks
FEATURES
• 0.36 watt to 1.8 watt at + 70°C.
• Qualified to MIL-PRF-83401.
• Designed for automatic insertion.
• Withstands thermal stress from - 65°C to + 125°C.
• Conforms to IC package configurations.
• High temperature solder joints.
• Custom schematic MIL-equivalent available.
CIRCUIT APPLICATIONS
C Schematic
Standard Profile
Low Profile
6 pin (M8340104xxxxxxC)
6 pin (M8340107xxxxxxC)
8 pin (M8340105xxxxxxC)
8 pin (M8340108xxxxxxC)
10 pin (M8340106xxxxxxC)
10 pin (M8340109xxxxxxC)
5, 7 or 9 resistors with one pin common
Pin #1
6 Pin
8 Pin
10 Pin
This model provides the user with a choice of 5, 7 or 9 nominally equal resistors,
each connected to a common pin (Pin No.1). Commonly used in the following
applications:
• “Wired OR” Pull-up
• Power Gate Pull-up
• MOS/ROM Pull-up/Pull-down
• Open Collector Pull-up
• TTL Input Pull-down
• TTL Unused Gate Pull-up
G Schematic
Standard Profile
Low Profile
6 pin (M8340104xxxxxxG)
6 pin (M8340107xxxxxxG)
8 pin (M8340105xxxxxxG)
8 pin (M8340108xxxxxxG)
10 pin (M8340106xxxxxxG)
10 pin (M8340109xxxxxxG)
3, 4 or 5 isolated resistors
6 Pin
Pin #1
8 Pin
10 Pin
This model provides the user with a choice of 3, 4 or 5 nominally equal resistors.
Each resistor is isolated from all others. Commonly used in the following
applications:
• “Wired OR” Pull-up
• Power Driven Pull-up
• Power Gate Pull-up
• Line Termination
ELECTRICAL SPECIFICATIONS
Resistance Range: 100 ohms to 1 Megohm standard profile,
27 ohms to 1 Megohm low profile.
Resistance Tolerance: ± 1%, ± 2%, ± 5% standard. Tighter
tolerances available.
Temperature Coefficient: (- 55°C to + 125°C)
“K” = ± 100PPM/°C, “M” = ± 300PPM/°C.
Package Power Rating:
Schematic
Standard Profile
Low Profile
C
1.0 watt to 1.8 watt
0.6 watt to 1.08 watt
G
0.6 watt to 1.0 watt 0.36 watt to 0.60 watt
Maximum Operating Voltage: 50 volts per resistor.
Document Number 68014
Revision 23-Sep-99
• Long-line Impedance Balancing
• LED Current Limiting
• ECL Output Pull-down
• TTL Input Pull-down
Dielectric Strength: 200 V RMS, 1 minute.
Insulation Resistance: 10,000 Megohm minimum.
MECHANICAL SPECIFICATIONS
Resistive Element: Thick film.
Encapsulation: Thermoset epoxy mold.
Terminals: Solderable leads.
Terminal Strength: 4.5 pounds applied to 5 terminals for
30 seconds.
Solderability: Meets MIL-STD-202, Method 208.
ENVIRONMENTAL SPECIFICATIONS
Temperature Limits: - 65°C to + 125°C.
www.vishay.com
21