D
WIMA MP 3-X2
Metallized Paper (MP)
RFI-Capacitors Class X2
PCM 10 mm to 27.5 mm
Special Features
Electrical Data
˜ Particularly high reliability against
active and passive flammability
˜ Excellent self-healing as well as
high voltage strength
˜ High degree of interference
suppression due to good
attenuation and low ESR
˜ For temperatures up to +110°
C
˜ According to RoHS 2002/95/EC
Typical Applications
Class X2 RFI applications to meet
EMC regulations
˜ Capacitors connected to the mains
between phase and neutral or
phase and phase conductors
˜ Installation category II in
accordance with IEC 60664,
pulse peak voltage T 2.5 kV
Construction
Dielectric:
Paper, epoxy resin impregnated
Capacitor electrodes:
Vacuum-deposited
Internal construction:
Capacitance range:
1000 pF to 1.0 mF (E12-values on request)
Rated voltages: 250 VAC, 275 VAC
Continuous DC voltage* (general guide):
630 V
Capacitance tolerances: ±20%
Operating temperature range:
–40) C to +110) C
Climatic test category:
40/110/56/C in accordance with IEC
Insulation resistance at +20+ C:
C T 0.33 mF: 12 x 10 3 M¸
C 0.33 mF: 4000 sec (M¸ x mF)
Measuring voltage: 100 V/1 min.
Dissipation factors:
tan d T 13 x 10 –3 at 1 kHz and +20+ C
Test specifications:
In accordance with DIN EN 60384-14
Approvals:
Maximum pulse rise time:
Capacitance
pF/mF
1000
1100
1500
1100
2200 ... 4700 500
6800 ... 0.022 300
0.033 ... 0.047 200
0.068 ... 1.0 100
for pulses equal to a voltage amplitude
with 2 x UAC = 390 V
according to IEC 60384-14
Test voltage: 2700 VDC, 2 sec.
Reliability:
Operational life 300 000 hours
Failure rate 1 fit (0.5 x U r and 40) C)
Country Authority Specification
Symbol
Germany
VDE
USA
Canada
V
DIN EN 132 400 E
D
IEC 60384-14/2
EN 132 400
UL
CSA
Pulse rise time V/msec
max. operation
UL 1283
C 22.2 No. 8
Approval-No. Approval-No.
250 VAC
275 VAC
89749
89749
E 100438
E 100438
LR 93312-1
LR 93312-1
Capacitor paper
Vacuum-deposited
electrode
Metal contact layer
(schoopage)
Terminating wire
Encapsulation:
Self-extinguishing epoxy resin, UL 94 V-0,
metal foil
Terminations:
Tinned wire.
Marking:
Marking: Black on Silver.
Mounting Recommendation
To minimize or avoid shock and/or
vibration stresses to terminating wires
and solder connections we recommend to
fix voluminous resin-potted MP capacitors
as from e.g. PCM 22.5 mm in an
appropriate way since for constructional
reasons they do not sit tight on the
board.
Packing
Available taped and reeled up to and
including PCM 22.5 mm.
Detailed taping information and graphs
at the end of the catalogue.
For further details and graphs please
refer to Technical Information.
* If safety-approved EMI suppression
capacitors are operated with a DC voltage being above the specified AC voltage
rating the given approvals are no longer
valid (DIN EN 60384-14).
Furthermore the permissible pulse rise time
du/dt (F max.) will be subject to a reduction
according to
if the DC operating voltage UDC is higher
than 2 x UAC
92
01.10
Fmax. = F r x 2 x UAC
/ UDC
