TH09/2479
TH97/2478
P6KE SERIES
IATF 0113686
SGS TH07/1033
TRANSIENT VOLTAGE
SUPPRESSOR
DO-15
VBR : 6.8 - 600 Volts
PPK : 600 Watts
1.00 (25.4)
MIN.
0.142 (3.6)
0.102 (2.6)
FEATURES :
*
*
*
*
*
Glass passivated jungtion chip
600W surge capability at 1ms
Excellent clamping capability
Low zener impedance
Fast response time : typically less
then 1.0 ps from 0 volt to VBR(min.)
* Typical IR less then 1μA above 10V
* Pb / RoHS Free
0.300 (7.6)
0.230 (5.8)
1.00 (25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
MECHANICAL DATA :
Dimensions in inches and ( millimeters )
* Case : DO-15 Molded plastic
* Epoxy : UL94V-0 rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 0.4 gram
DEVICES FOR BIPOLAR APPLICATIONS
For Bi-directional use C or CA Suffix
Electrical characteristics apply in both directions
MAXIMUM RATINGS
Rating at 25 °C ambient temperature unless otherwise specified.
Rating
Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1)
Steady State Power Dissipation at TL = 75 °C
Lead Lengths 0.375", (9.5mm) (Note 2)
Symbol
Value
Unit
PPK
Minimum 600
W
PD
5.0
W
IFSM
100
A
TJ, TSTG
- 65 to + 175
°C
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
(JEDEC Method) (Note 3) Unidirectional only
Operating and Storage Temperature Range
Notes :
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1
(2) Mounted on Copper Leaf area of 1.57 in2 (40mm2).
(3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum and VB >220V, IFSM is 50 A.
Page 1 of 4
Rev. 07 : February 23, 2011
