Low Signal Relay
G6K
• Compact fourth generation design, offers excellent board
space savings.
• Available in 2.54 and 3.2 mm coil-contact terminal spacing.
• “-Y” models meet 2.5 kV Bellcore surge requirements.
• Conforms to FCC Part 68.
• Terminal design based on Omron’s successful G6S relay.
• Available in PCB through-hole, SMT gullwing and SMT
“inside-L” terminals.
• UL recognized / CSA certified.
• Available in single coil latching.
• RoHS Compliant.
RC
Ordering Information
To Order: Select the part number and add the desired coil voltage rating (e.g., G6K-2F-DC5).
Terminal
Contact form
Model
Non-latching
2.54 mm spacing
Gullwing
DPDT
Non-latching
3.2 mm coil-contact
terminal spacing
Single coil latching
3.2 mm coil-contact
terminal spacing
G6K-2F
G6K-2F-Y
G6KU-2F-Y
Inside “L”
G6K-2G
G6K-2G-Y
G6KU-2G-Y
PCB through-hole
G6K-2P
G6K-2P-Y
G6KU-2P-Y
When ordering tape packing (surface mount versions), add “-TR” to the model number (e.g., G6K-2G-TR-DC5)
Specifications
■ Contact Data
Load
Resistive load (cosφ=1)
Rated load
0.3 A at 125 VAC
1 A at 30 VDC
Contact material
Ag (Au clad)
Max. carry current
1A
Max. operating voltage
125 VAC, 60 VDC
Max. operating current
1A
Max. switching capacity
37.5 VA, 30W
Min. permissible load (See note)
10 μA at 10 mVDC
Note: This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50 Ω. This value may vary
depending on the switching frequency and operating environment. Always double-check relay suitability under actual operating conditions.
Low Signal Relay
G6K
53
