FM25CL04
4Kb FRAM Serial 3V Memory
Features
4K bit Ferroelectric Nonvolatile RAM
• Organized as 512 x 8 bits
• Unlimited Read/Write Cycles
• 10 Year Data Retention
• NoDelay™ Writes
• Advanced High-Reliability Ferroelectric Process
Write Protection Scheme
• Hardware Protection
• Software Protection
Low Power Consumption
• Low Voltage Operation 2.7-3.65V
• 1 µA Standby Current
D
E
D S
N N
E G
M SI 4
M E 5L0
O D 2
C
FM
E W by
R E d
T N lace
O R ep
N O R
F
Very Fast Serial Peripheral Interface - SPI
• Up to 20 MHz Frequency
• Direct Hardware Replacement for EEPROM
• SPI Mode 0 & 3 (CPOL, CPHA=0,0 & 1,1)
Industry Standard Configuration
• Industrial Temperature -40°C to +85°C
• 8-pin SOIC
• “Green” 8-pin SOIC
Description
Pin Configuration
The FM25CL04 is a 4-kilobit nonvolatile memory
employing an advanced ferroelectric process. A
ferroelectric random access memory or FRAM is
nonvolatile and performs reads and writes like a
RAM. It provides reliable data retention for 10 years
while eliminating the complexities, overhead, and
system level reliability problems caused by
EEPROM and other nonvolatile memories.
Unlike serial EEPROMs, the FM25CL04 performs
write operations at bus speed. No write delays are
incurred. The next bus cycle may commence
immediately without the need for data polling. The
next bus cycle may start immediately. In addition, the
product offers virtually unlimited write endurance.
Also, FRAM exhibits much lower power
consumption than EEPROM.
These capabilities make the FM25CL04 ideal for
nonvolatile memory applications requiring frequent
or rapid writes or low power operation. Examples
range from data collection, where the number of
write cycles may be critical, to demanding industrial
controls where the long write time of EEPROM can
cause data loss.
The FM25CL04 provides substantial benefits to users
of serial EEPROM as a hardware drop-in
replacement. The FM25CL04 uses the high-speed
SPI bus, which enhances the high-speed write
capability
of
FRAM
technology.
Device
specifications are guaranteed over an industrial
temperature range of -40°C to +85°C.
This product conforms to specifications per the terms of the Ramtron
standard warranty. The product has completed Ramtron’s internal
qualification testing and has reached production status.
Rev. 3.1
May 2005
CS
1
8
VDD
SO
2
7
HOLD
WP
3
6
SCK
VSS
4
5
SI
Pin Name
/CS
/WP
/HOLD
SCK
SI
SO
VDD
VSS
Function
Chip Select
Write Protect
Hold
Serial Clock
Serial Data Input
Serial Data Output
Supply Voltage
Ground
Ordering Information
FM25CL04-S
FM25CL04-G
8-pin SOIC
“Green” 8-pin SOIC
Ramtron International Corporation
1850 Ramtron Drive, Colorado Springs, CO 80921
(800) 545-FRAM, (719) 481-7000
www.ramtron.com
Page 1 of 12