Emboss Tape
LEX CONNECTOR
2.5mm pitch/For LED Lamp/Disconnectable Crimp style connectors
• Low profile and space saving design
Mounting height at connector mounting side: 1.2mm
• Secure locking mechanism
• Mechanism for preventing wrong insertion
• Halogen-free and RoHS compliant
Specifications –––––––––––––––––––
• Current rating: 3A AC, DC (AWG #22)
• Voltage rating: 300V AC, DC
• Temperature range: -55˚C to +105˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 10m Ω max.
After environmental testing/ 20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 1,700V AC/minute
• Applicable wire: Conductor size/ AWG #30 to #22
Insulation O.D./ 0.7 to 1.3mm
Considering about luminescence property
of LED package, this LEX connector is
designed as low profile bottom type
connector for LED lighting equipment, and
achieves the space saving at the connector
mounting side.
In consideration of connector mating
operation, secure lock and mechanism for
preventing wrong insertion are provided.
With the assumption that the load may be
applied to the soldering part when mating
the connector, the strength of soldering
part after mounting the connector on PCB
has been largely improved.
Standards ––––––––––––––––––––––
0
Recognized E60389
1Certified LR20812
±0.05
A
1.2
Connector outline
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
+0.1
0
2.5 ±0.03
+0.1
0
(2.55)
(7.5)
(0.25)
3.2
+0.1
0
0.1±0.05
3.7
+0.1
0
1.6
1.1
4×Ｒ0.2
PC board edge
0.15
B
+0.1
0
±0.05
1.95
+0.1
0
Circuits
2
4
Dimensions (mm)
A
B
―
7.5
Note: 1. The above figure is the figure viewed from the connector mounting side.
Note: 2. Tolerances are non-cumulative: ±0.05mm for all centers.
The dimensions above should serve as a guideline. Contact JST for details.
1
9.0
14.0
