HOME＞在庫検索＞在庫情報
4009UB
075-40 Series 075-40 Series The 075-40 series probes are designed for mixed height (dual-level) loaded board testing. Sockets Probe “A” .052 [1.32] O.D. (TYP) “B” .025 [0.635] 03 - Chisel 13 41 - Spear - Chisel 61 - Blade 94 - Crown 075-SD “A” .0585 [1.49] O.D. (TYP) 075-SD 43 - Chisel 71 - Blade 250R 1.170 [29.72] .180 [4.57] 075-SDN250S .045 [1.14 ] O.D. 24 - Crown 250W “B” Ø.025 [0.635] 06 - Star .300 [7.62] (TYP) .030 [0.76] (TYP) 1.175 [29.85] .197 [5.00] Ø.039 [1.00] 075-SDS250M 1.070 [27.18] .032 [0.82] I.D. Typical Dual-Level Fixture Layout 075-SD 250N .395 [10.03] .030 [0.76] .300 [7.62] .050 [1.27] .150 Tip Height Difference .057 [1.45] 075-SD Unit Under Test 08 - Triad 28 44 - Crown - Triad .060 Stroke 100-40 or 075-40 Series 100-25 or 075-25 Series .090 Gap .317 Stroke 251 075-SD 254 .167 Stroke Fixture Not Actuated Nickel silver/ID precious metal clad 18 milliohms G Nickel silver or phosphor bronze/OD gold plated 17 milliohms 20 milliohms Standard material is heat-treated BeCu/plated gold over nickel (see S option for steel plunger) Spring Force Preload @ .317 Stroke Material X Extra High 1.2 [34] 4.3 [122] Music wire U POINT Material/Finish See Points Letter SPRING Digits Ultra High 4.1 [116] 9.3 [264] Letter OPTION B D Music wire Spring Force Fatigue Life (Cycles @ Stroke) 0.00 12.0 Description Curved tube (pylon replacement) Decreased stroke .250 [6.35]. Must select from 075-25 series spring forces with this option. N No probe lubrication (Removing probe lubrication greatly reduces cycle life. Unlubricated probes are recommended only for low temperature applications) S 10.0 Order the ET75-KIT (includes ET75 and IT75-FLUSH) for removing a damaged socket from its mounting hole. Sockets must be FLUSH before extraction. Plunger Stroke (Millimeters) 2.54 5.08 7.62 10.16 0.317 [8.05] Stroke 50K min @ .317 [8.05] max 10K min @ .317 [8.05] max Order the IT75-FLUSH or IT75 SET .XXX (.000/.345 [0.00/8.75]) or AT75-KIT or AT75M-KIT adjustable tools to install 075-25 sockets. Mounting holes in AT7000, G10/FR4 or similar materials should be gauged at .0530/.0550 [1.35/1.40] diameter using PG75 pin gauge. Use PT100/75 to install 075-40 probes. Full stroke .400 [10.16] Working stroke: up to .317 [8.05] Operating temp.: 40°F to 250°F [5°C to 120°C] Current rating (for single probe in ambient air with 70°F [20°C] rise): 6.5 Amps 283 * 0.350 (8.89) max stroke for "U" Spring *U 8.0 227 170 6.0 Heat-treated steel/plated gold over nickel (see points for availability) 4.0 113 X 25 example: 075 - SDG250W Letter Material/Finish G Nickel silver/OD gold plated N Nickel silver/no finish S Stainless steel/no finish Digit Description 0 Single press ring located at .300 [7.62] 1 Single press ring located at .395 [10.03] 4 Single extra long press ring Letter A in (mm) B in (mm) Round pin 1.480 [37.59] .410 [10.44] Round pin 1.617 [41.07] .547 [13.89] R3* Round pin 1.286 [32.66] .216 [5.49] R5* Order the PE75 for removing 075-40 probes from its socket. (Not for use with headless point styles). Description Round pin 2.017 [51.23] .947 [24.05] .429 [10.90] M Male round tube N No termination S Solder cup R* R1* No option required 0.0 0.000 0.100 0.200 0.300 0.400 Plunger Stroke (Inches) 26 Direct Sales (603) 926-0348 • Support (603) 926-1193 • Fax (603) 926-8701 • Email: sales@qatech.com • www.qatech.com Square wire wrap pin 1.499 [38.08] Square wire wrap pin 1.764 [44.81] .694 [17.63] W2* 57 2.0 W* W1* (blank) Notes: Not available in 1 or 4 press ring Not available in G tube material Not available in S tube material/finish Not available in M or S termination Available only in S tube material and 0 press ring Available only in M termination Square wire wrap pin 2.114 [53.70] US Patent No. 4,885,539 P SOCKET P/N: 075 - SD (see pages 56 & 57) TUBE Average Resistance @ 250 mV Nickel silver/no finish Installation and Extraction Tools Mechanical Material/Finish N Probe Specifications Force (Grams) TUBE Letter - Chisel PRESS RING X- 40 example: 075 - PRP4003X Force (Ounces) PROBE P/N: 075 - PR 53 34 - Crown In-Circuit Test Position TERMINATION 09 - Serrated Functional Test Position .075 [1.91] Centers .400 [10.16] Stroke Actual Size Actual Size 1.044 [26.52] * Pin material: Phosphor bronze/gold plated over nickel All specifications subject to change without notice. All dimensions are in inches [mm]. All spring forces in ounces [gms]. © 2005 QA Technology Company, Inc 27
お買い上げ小計が１万円以上の場合は送料はサービスさせて頂きます。１万円未満の場合、また時間指定便はお客様負担となります。（送料は地域により異なります。）
