^s.m.i-donductoi Lpiodueti, line.
TELEPHONE: (973) 376-2922
(212)227-6005
FAX: (973) 376-8960
20 STERN AVE.
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
TIC116 SERIES
SILICON CONTROLLED RECTIFIERS
•
8 A Continuous On-State Current
•
80 A Surge-Current
•
Glass Passivated Wafer
•
400 V to 800 V Off-State Voltage
TO-220 P>IVCKAGE
(TOP\NEW)
c
•
;
2
<-•!<
Max IGT of 20 mA
o
1
A c
;
3
Pin 2 is in electrical contact with the mounting base.
absolute maximum ratings over operating case temperature (unless otherwise noted)
RATING
SYMBOL
TIC116D
Repetitive peak off-state voltage
Repetitive peak reverse voltage
TIC116M
TIC116S
TIC116N
TIC116D
TIC116M
TIC116S
TIC116N
Continuous on-state current at (or below) 70°C case temperature (see Note 1)
Average on-state current (180° conduction angle) at (or below) 70°C case temperature
(see Note 2)
Surge on-state current at (or below) 25°C case temperature (see Note 3)
Peak positive gate current (pulse width < 300 us)
Peak gate power dissipation (pulse width < 300 us)
Average gate power dissipation (see Note 4)
Operating case temperature range
Storage temperature range
Lead temperature 1 .6 mm from case for 10 seconds
VDRM
VRRM
VALUE
400
600
700
800
400
600
700
800
UNIT
V
V
'T(RMS)
8
A
'T(AV)
5
A
ITM
'QM
80
A
PGM
3
A
5
W
P G(AV)
1
W
TC
-40to+110
°C
-4010+125
230
°c
°c
Tstg
TL
NOTES: 1 . These values apply for continuous dc operation with resistive load. Above 70°C derate linearly to zero at 1 1 0°C.
2. This value may be applied continuously under single phase 50 Hz half-sine-wave operation with resistive load. Above 70°C derate
linearly to zero at 110°C.
3. This value applies for one 50 Hz half-sine-wave when the device is operating at (or below) the rated value of peak reverse voltage
and on-state current. Surge may be repeated after the device has returned to original thermal equilibrium.
4, This value applies for a maximum averaging time of 20 ms.
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going
to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use.
NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
Quality Semi-Conductors