ALUMINUM ELECTROLYTIC CAPACITORS
CY
Miniature Sized, High Ripple Current, High Reliability
series
CS
High ripple current and Long Life product withstanding
load life of 10000 to 12000 hours at +105°C.
Suited for ballast application.
Compliant to the RoHS directive (2002/95/EC).
Smaller
CY
Specifications
Item
Performance Characteristics
Category Temperature Range
– 40 to +105°C (160 to 400V), – 25 to +105°C (420 to 500V)
Rated Voltage Range
160 to 500V
Rated Capacitance Range
6.8 to 560µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
After 1 minute's application of rated voltage, leakage current is not more than 0.04CV+100 (µA)
Measurement frequency : 120Hz at 20°C
Tangent of loss angle (tan δ)
Rated voltage (V)
tan δ (MAX.)
160
0.20
200
0.20
250
0.20
350
0.24
400
0.24
420
0.24
450
0.24
500
0.24
Measurement frequency : 120Hz
Rated voltage (V)
Stability at Low Temperature
Impedance ratio ZT / Z20 (MAX.)
Z–25°C / Z+20°C
Z–40°C / Z+20°C
160
3
6
200
3
6
250
3
6
350
5
6
400
5
6
500
6
--
450
6
--
420
6
--
Endurance
The specifications listed at right shall be met when the
capacitors are restored to 20˚C after D.C. bias plus rated
ripple current is applied for 12000 hours (10000 hours for 20L
or less, 500V) at 105˚C, the peak voltage shall not exceed the
rated voltage.
Shelf Life
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Marking
Printed with white color letter on dark brown sleeve.
Capacitance change
tan δ
Leakage current
Within ±20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
Type numbering system (Example : 250V 100µF)
Radial Lead Type
1
φd
Sleeve (P.E.T.)
2
3
4
5
6
7
8
9
10 11
12
U CY 2 E 1 0 1 M HD T
Size code
Capacitance tolerance (±20%)
P ± 0.5
φD+0.5MAX.
Configuration
Rated capacitance (100µF)
Rated voltage (250V)
Series name
Pressure
relief vent
L + 1.5 MAX.
15 MIN
Type
4 MIN
Configuration
φD
(mm)
φD
10
12.5
16
18
P
5.0
5.0
7.5
0.6
0.6
0.8
PD
12.5 to 18
HD
7.5
φd
Pb-free leadwire
Pb-free PET sleeve
10
0.8
In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm.
• Please refer to page 20 about the end seal configulation.
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100B