Aluminum Electrolytic Capacitors/ TG
Surface Mount Type
Series:
TG
Type:
V
■ Features
●
●
●
●
●
Endurance:125 °C 1000 h to 2000 h
Miniaturization (40 % less than TA Series)
Low ESR (Low temp)
Vibration-proof product is available upon request. (φ8 mm and larger)
RoHS directive compliant (Parts No φ8 to φ10 : EEE✽, φ12.5 to φ18 : EEV✽)
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan δ
Characteristics
at Low Temperature
W.V. (V)
Z(–25 °C)/Z(+20 °C)
Z(–40 °C)/Z(+20 °C)
10
3
6
–40 °C to +125 °C
10 V.DC to 100 V.DC
10 µF to 4700 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV After 2 minutes
Please see the attached standard products list
16
25
35
50
63
80
100
2
2
2
2
2
2
2
4
4
3
3
3
3
3
(Impedance ratio at 120 Hz)
After applying rated working voltage for 1000 hours (φ8҂6.2), 2000 hours (φ8҂
10.2 <) at +125 °C±2 °C and then
being stabilized at +20 °C, capacitors shall meet the following limits.
Endurance
Capacitance change
tan δ
DC leakage current
±30 % of initial measured value (code U : ±35 %)
< 300 % of initial specified value (code U : ±350 %)
< initial specified value
Shelf Life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change
±10 % of initial measured value
tan δ
< initial specified value
DC leakage current
< initial specified value
■ Frequency correction factor for ripple current
Frequency (Hz)
120
0.65
Correction factor
■ Marking
1k
0.85
10 k
0.95
100 k to
1.00
■ Dimensions in mm (not to scale)
(Unit : mm)
0.3 max.
Rated Voltage Mark
A
10 V
C
16 V
E
25 V
V
35 V
K
(P)
H
L
Pressure Relief (φ10 and larger)
Lead-Free products (> φ12.5)
Lot number
B±0.2
Mark for Lead-Free
Products Black Dot
(Square)
Rated Voltage Mark
Lot number
Negative polarity
marking (–)
A±0.2
–
Series identification
+
(I)
Capacitance (µF)
100
A TG
φD±0.5
Negative polarity
marking (–)
(I)
Example : 10 V 100 µF, 10 V 1000 µF
Marking coloc : BLACK
Lead-Free products (< φ10)
W
( ) Reference size
Capacitance (µF)
1000
A TG
Series identification
Rated Voltage Mark
H
J
K
2A
50 V
63 V
80 V
100 V
Size
code
E
F
G
H13
J16
K16
D
8.0
8.0
10.0
12.5
16.0
18.0
L
6.2±0.3
10.2±0.3
10.2±0.3
13.5±0.5
16.5±0.5
16.5±0.5
A, B
8.3
8.3
10.3
13.5
17.0
19.0
H
9.5 max.
10.0 max.
12.0 max.
15.0 max.
19.0 max.
21.0 max.
I
3.4
3.4
3.5
4.7
5.5
6.7
W
0.65±0.1
0.90±0.2
0.90±0.2
0.90±0.3
1.20±0.3
1.20±0.3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-50 –
P
2.2
3.1
4.6
4.4
6.7
6.7
K
+ 0.15
- 0.20
0.35
0.70±0.20
0.70±0.20
0.70±0.30
0.70±0.30
0.70±0.30
00 Nov. 2012
