F-211
®
(0,50mm) .0197"
(0,80mm) .0315"
HQDP, EQDP SERIES
HQDP–020–06.00–SEU–TTL–2–F
EQDP–028–06.00–STR–TTL–3–B
®
Q PAIRS TWINAX CABLE ASSEMBLIES
SPECIFICATIONS
For complete specifications
see www.samtec.com?EQDP
or www.samtec.com?HQDP
Cable:
30 AWG twinax
micro ribbon
FILE NO. E111594
Signal Routing:
100Ω Differential
Cable Bending Radius:
(11,11mm) 7/16" min
Plating:
Au over 50µ" (1,27µm) Ni
Current Rating:
1 A max
Propagation Delay:
4.67 nsec/meter
Operating Temp Range:
-25°C to +105°C
Skew (pair-to-pair):
<10 ps/ft
Skew (within a pair):
<5 ps/ft
EMI Performance:
FCC Class A
RoHS Compliant:
Yes
EQDP Mates with:
QTE-DP, QSE-DP
HQDP Mates with:
QTH-DP, QSH-DP
Differential Pair
routing
30 AWG
twinax
ribbon cable
Surface
Mount or
Edge Mount
Rated @ 7dB Insertion Loss
Cable
Length
EQDP
HQDP
6" (152,4mm) 10.05 GHz / 20.10 Gbps 9.07 GHz / 18.14 Gbps
12" (304,8mm) 9.96 GHz / 19.92 Gbps 8.79 GHz / 17.58 Gbps
19.68" (0,5m) 9.95 GHz / 19.90 Gbps 9.20 GHz / 18.40 Gbps
39.37" (1m) 4.92 GHz / 9.84 Gbps 6.30 GHz / 12.60 Gbps
Performance data for other cable lengths and complete
test data available at www.samtec.com?HQDP or
www.samtec.com?EQDP or contact sig@samtec.com
NO. OF
PAIRS
TYPE
HQDP
s
ocol
Prot orted
Supp
–020, –040,
–060, –080
= (0,50mm)
.0197" pitch
(20 pairs per bank)
HQDP Series
EQDP
–014, –028,
–042, –056
WIRE
LENGTH
–“XX.XX”
= Wire Length
in Inches
(95,3mm) 03.75"
minimum
Optional Captive Screw or
Screw Mount Option
Socket or
Terminal
END
NO. 1
END
NO. 2
Specify
END
ASSEMBLIES
from chart
TTR
Note: Cable lengths longer
than 40.00" (1 meter) are not
supported with S.I. test data.
Note: Verify part number with
Samtec’s Interactive Cable
Builder at www.samtec.com/
cable_builder/pitch.aspx
Terminal, Bottom,
Notch Right
Terminal, Bottom,
Notch Left
Socket, Top
Notch Right,
STL
Socket, Top,
Notch Left
SBR
report at
Download test QDP or
com?H
www.samtec.
com?EQDP
www.samtec.
TBR
STR
Wire Length ± (1,27) .050
Terminal, Top,
Notch Left
TBL
OAL = Wire Length + (20,32) .800 ± (3,81) .150
Terminal, Top,
Notch Right
TTL
(14 pairs per bank)
EQDP Series
SURFACE MOUNT
Socket, Bottom,
Notch Right
SBL
SAS
SATA
el
Fibre Chann
Ethernet
®
PCIe
Infiniband
= (0,80mm)
.0315" pitch
END
Socket, Bottom,
Notch Left
END
WWW.SAMTEC.COM
TED
Terminal, Edge,
Notch Down
Socket, Edge,
Notch Up
SED
Note: This Series is
non-standard, non-returnable.
–1
Leave
blank for
no Screw
Option
= Pin 1 to
Pin 1
–2
= Pin 1 to
Pin 2
–3
= Pin 1 to
Second
Last Pin
Socket, Edge,
Notch Down
–F
= End
No. 1
–S
= End
No. 2
–B
–4
= Pin 1 to
Last Pin
= Both
Ends
WIRING REQUIREMENTS
WIRING
END OPTIONS
OPTION
1 or 2
Terminal, Edge,
Notch Up
SEU
END NO. 2
(–TTR SHOWN)
SCREW
OPTION
EDGE MOUNT
TEU
END NO. 1
(–TEU SHOWN)
WIRING
OPTION
3 or 4
TTR, TBL, STL,
SBR, TEU, SED to TTR,
TBL, STL, SBR, TED, SEU
or
TTL, TBR, STR,
SBL, TED, SEU to TTL,
TBR, STR, SBL, TEU, SED
TTR, TBL, STL,
SBR, TEU, SED to TTL,
TBR, STR, SBL, TEU, SED
or
TTL, TBR, STR,
SBL, TED, SEU to TTR,
TBL, STL, SBR, TED, SEU
