The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
PC Card Socket Connector Complies with PC card Standard
IC1 Series
sFeatures
1. Compliant with PC Card Standards
Polarized entry prevents wrong insertion into a
corresponding connector. And sequential
contact engagement prevents electorostatic
discharge,avoiding possible damage to sensitive
board circuits.
2. Suited to Automatic Mounting
Packaged for a board placement with aoutmated
equipment.
3. Lead Offset
Available with several board termination
levels,to allow use of different height board
components.
In relation to the center line of connector,0.2mm,+0.3mm,+0.55mm,+0.9mm and
terminations on board center are available.
sProduct Specifications
Current rating 0.5 A
Ratings
Operating temperature
Voltage rating 125 V AC
Item
-55ç to +85ç (Note 1)
Operating humidity
95% R.H. max.
(No condensation)
Storage temperature
-40ç to +70ç (Note 2)
Storage humidity
40% to 70% (Note 2)
Specification
Conditions
1. Insulation resistance
1000Mø min.
500 V DC
2. Withstanding voltage
No flashover or insulation breakdown.
500 V AC / 1 minute
3. Contact resistance
40 mø max. (initial value) (Note 3)
1 mA
4. Vibration
No electrical discontinuity of 100ns or
more
Frequency: 10 to 2000 Hz, single amplitude of 1.52 mm or
acceleration of 147 m/s2(peak), 4 hours in each of the 3 directions.
5. Humidity (Steady state) Insulation resistance: 100 Mø min.
96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature cycle
No damage, cracks, or parts looseness.
-55ç, 30 min /15 to 30ç, within 5 min/85ç, 30 min
/15 to 35ç, within 5 min, for 5 cycles
7. Durability
(Insertion/withdrawal)
Change of contact resistance from the
start should be 20 mø max.
10000 cycles at 400 to 600 cycles per hour
8. Resistance to
soldering heat
No deformation of components
affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
sMaterials
Part
Material
Finish
Remarks
Insulator
PPS
Color : Black
UL94V-0
Contact
IC1K,IC1HA:Phosphor bronze
Others:Beryllium copper
Contact Area : gold plating
Lead Area
: solder plating
-----------------
A73