MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Long life forφ5 toφ8 product, 105℃
New!
LE
Series
●Suitable
for long life and high reliability products
●Downsize and long life
●Endurance with ripple current:10,000 hours at 105℃
●Case size range:φ5×11L to φ8×11.5L
●Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
●RoHS Compliant
◆SPECIFICATION
Items
Characteristics
Category
Temperature Range
-25 to +105℃
10 to 100Vdc
±20% (M)
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
10V 16V 25V 35V 50V 63V 100V
Rated voltage (Vdc)
tan (Max.)
0.45 0.35 0.30 0.22 0.19 0.17 0.15
δ
10V 16V 25V 35V 50V 63V 100V
Rated voltage (Vdc)
Z(-25℃)/Z(20℃)
8
6
4
4
3
3
3
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
(at 20℃, 120Hz)
(at 20℃ after 2 minutes)
(at 20℃,120Hz)
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours at 105℃.
Capacitance change
≦±25% of the initial value
≦300% of the initial specified value
D.F. (tan )
δ
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±25% of the initial value
D.F. (tan )
≦300% of the initial specified value
δ
Leakage current
≦The initial specified value
Endurance
Shelf Life
◆DIMENSIONS [mm]
Code : E
φd
Sleeve (PET : Brown)
F±0.5
●Terminal
φD
φd
φD'
F
φD'
L'
L'
15min.
5
0.5
2.0
8
6.3
0.6
0.5
3.5
2.5
φD+0.5max.
L+1.5max.
4min.
Gas escape end seal
Vent
(Except φ5)
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
E L E− AAA E AA AAA M AAA D
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 4.7µF:4R7, 10µF:100,100µF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 16V:160, 100V:101)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/2)
CAT. No. E1001M