MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
KZE
Low impedance, 105℃
KZH
Series
Lower Z
●Ultra
Low impedance for Personal Computers Storage Equipment
with ripple current: 1,000 to 5,000 hours at 105℃
●Non solvent resistant type
●RoHS Compliant
KZE
●Endurance
Lower Z
KY
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
-40 to +105℃
6.3 to 100Vdc
±20% (M)
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 80V 100V
tanδ (Max.)
0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
Z (-25℃) / Z (+20℃)
2max.
Z (-40℃) / Z (+20℃)
3max.
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
(at 20℃, 120Hz)
(at 20℃ after 2 minutes)
(at 20℃, 120Hz)
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃.
Time
7L : 1,000hours φ5 &φ6.3 : 2,000hours φ8 : 3,000hours φ10 : 4,000hours φ12.5 toφ18 : 5,000hours
Capacitance change
≦±25% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±25% of the initial value
≦200% of the initial specified value
D.F. (tanδ)
Leakage current
≦ The initial specified value
Endurance
Shelf Life
◆DIMENSIONS [mm]
F±0.5
Code : E
φd
Sleeve (PET : Brown)
F±0.5
●Terminal
16, 18
8
6.3
10, 12.5
5
0.45 0.45 0.45
7L
0.6
0.8
11L∼ 0.5 0.5 0.6
2.0 2.5 3.5
5.0
7.5
F
φD+0.5max.
φD'
L+1.5max.(7L : L+1.0max.)
L'
φD
φD'
φd
L'
Vent
(Except 7L &φ5 &φ6.3)
15min
4min
(φ5 to φ
10)
(φ12.5 to φ
16)
Gas escape end seal
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
E KZ E AAA E AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6.8µF:6R8, 10µF:100, 1,000µF:102)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 10V:100, 100V:101)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/3)
CAT. No. E1001M
