SNAPFIT - SCREWFIT
NEW
AC Inlets for Pcb Mounting –
Snap-in or Screw-on
Complete MULTIFIT family on page 10
Order Numbers:
GSP 2 . X X X X . X X
Screw-on
Snap-in
Color of Housing
1* = black
2 = grey
Standards: EN60320;
IEC 320 / C14
SNAPFIT
SCREWFIT
with insulation
cover
d1 = 6 ±0.05 for SNAPFIT
d1 = 3.6 for SCREWFIT
rear panel mounting
split panel mounting
• For “cold” connections 65˚C, Protection Class I or II
• Pcb mount with snap-in or screw-on feet (self-tapping screws provided)
• panel mount from rear or “sandwich” between top and bottom panels for
optimum stability (see page 10 for further information)
• Ground terminal solder / quick-connect 4.8 x 0.8mm or 6.3 x 0.8mm;
positioned for access from top or back of connector
• Optional insulation cover for protection against electrical contact
• Material: thermoplastic, polyamid 6.6 (UL 94V-O)
Terminals: brass, tin and nickel-plated
UL
CSA
VDE
SEMKO
SEV
12
recognition
certification
approval
approval
approval
15A/250V File #E96454
15A/250V File #LR38456
10A/250V File #73753
File
10A/250V
numbers
10A/250V
on request
Panel Mounting
1 = 1.0mm panel thickness
2 = 1.2mm panel thickness
3* = 1.5mm panel thickness
4 = 2.0mm panel thickness
5 = 2.5mm panel thickness
6 = 3.0mm panel thickness
Ground Terminal
0 = protection class II, without ground terminal
1* = protection class I, solder/quick connect 4.8 x
0.8mm, 90˚ to connector axis
2 = same as 1, but not connected with PCB
3* = protection class I, solder/quick connect terminal
4.8 x 0.8mm, in connector axis
4 = same as 3, but not connected with PCB
5 = protection class I, solder/quick connect terminal
6.3 x 0.8mm, 90˚ to connector axis
6 = same as 5, but not connected with PCB
7 = protection class I, solder/quick connect terminal
6.3 x 0.8mm, in connector axis
8 = same as 7, but not connected with PCB
A = protection class I, solder terminals, no PCB
terminals
B = protection class I, quick connect terminals 4.8 x
0.8mm, no PCB terminals
C = protection class I, solder terminals, 90˚ to the
connector axis
D = same as C, but not connected with PCB
E = protection class I, solder terminals, in
connector axis
F = same as E, but not connected with PCB
Insulation Cover
0* = without insulation cover
1* = black insulation cover, mounted **
2 = black insulation cover included (separate) **
Printed Circuit Board Mounting
0* = with 3mm self-tapping screws (screws not included)
1* = with 3mm self-tapping screws (2 screws included)
2* = with snap-in feet for PCB 1.6mm
3 = with snap-in feet for PCB 1mm
4 = with snap-in feet for PCB 1.2mm
5 = with snap-in feet for PCB 1.5mm
6 = with snap-in feet for PCB 2mm
7 = with snap-in feet for PCB 2.4mm
8 = with snap-in feet for PCB 3.2mm
Terminal Spacing
0 = No PCB terminals
1 = type spacings 7/9.7mm
2 = type spacings 9.05/7.3mm
3* = type spacings 9.05/9.7mm
4* = type spacings 7/7.3mm
Basic Specification
GSP2* = appliance connector for mounting on PCB
*Standard configuration. Contact Schurter for non-standard order minimums.
** For additional insulation cover (spare part only), use order number 0098.0077
Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail 73024.2314@compuserve.com • Website http://www.schurterinc.com
