1.27 mm pitch connector
Cable-side IDC type female connector
PCR-E( )F( )+
For cable
IDC
● Configuration of product Part No.
PCR-E ( ) F( )+
➀
➁
➂
➀ Series name
➁ No. of contacts: 20, 28, 36, 50, 68, 80, or 96
➂ Cable sizes for reference purposes (In case the cable sheath is made of PVC resin)
F : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of wire is 0.8-1 mm. For loose wire.
FA : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of wire is 0.5-0.65 mm. For loose wire.
FB: AWG#30(7 / 0.1). Outside diameter of wire is 0.5-0.65 mm. For loose wire.
FC: AWG#28(7 / 0.127) or AWG#30(1 / 0.254). For flat cable, t = 1.0 mm MAX. (See Note #1)
FD: AWG#30(7 / 0.1). For flat cable, t = 1.0 mm MAX. (See Note #1)
FH: AWG#32(7 / 0.08). Outside diameter of wire is 0.35-0.5 mm. For loose wire. (See Note #2)
FJ : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of wire is 0.65-0.8 mm. For loose wire.
(See Note #2)
FK: AWG#30(7 / 0.1). Outside diameter of wire is 0.65-0.8 mm. For loose wire. (See Note #2)
A
B
POS.#2
C
POS.#1
7.3
1.27
Form of 96-contact
connector
15˚
D
Part No. is marked on the opposite surface.
¡
™
£
7
HONDA is marked
on the opposite surface.
15.2
¢
Form of 96-contact
connector
Except of 50-contact
connector
12.7
C
Note 1:
FC is not available for 96-contact connector.
FD is not available for 20, 80, or 96-contact
connectors.
Note 2:
FH is available only for 68-contact connector.
FJ is available for 28, or 96-contact connectors.
FK is available only for 96-contact connector.
● Dimensions
Cable housing for loose wires
Part No.
PCR-E20F( )+
PCR-E28F( )+
A
21.65
B
13.35
C
11.43
D
16.25
26.7
18.43
16.51
21.33
PCR-E36F( )+
PCR-E50F( )+
31.8
23.51
21.59
26.41
40.7
32.4
30.48
35.3
➂ Shell
➃ Spacer
PCR-E68F( )+
PCR-E80F( )+
52.1
43.83
41.91
46.73
59.7
51.45
49.53
54.35
➄ Cable housings
PCR-E96F( )+
69.9
61.61
59.69
64.51
∞
● Components
➀ Contacts
➁ Insulator
Cable housing for flat cable
Mating connectors: PCR-E series PCB-side right-angle through hole type or SMT type connector
PCR-E series PCB-side straight through hole type or SMT type connector
Tool: (Refer to page Tool-12)
Through
hole
SMT
Press-in
IDC
Wire
Soldering Crimping wrapping
Others