General Purpose Relays
PCB Relays
SCHRACK
Miniature PCB Relay ORWH
n Compact
relay with 1 Form A and 1 Form C contact arrangement
switching capacity
n Flux proof or sealed type available
n 6kV dielectric strength type available
n 10A
Typical applications
Appliances, HVAC, emergency lighting
Zt
Approvals
Insulation Data
UL E82292, TUV R50138967
Technical data of approved types on request
Contact Data
Contact arrangement
1 form A, 1 NO
1 form C, 1 CO
Rated voltage
28VDC, 277VAC
Max. switching voltage
28VDC, 277VAC
Rated current
10A
Contact material
AgZnO, AgCdO, AgNi
Min. recommended contact load
100mA, 5VDC
Frequency of operation
600 ops./h
Operate/release time max.
10ms/5ms
Electrical endurance
AgZnO: form A, 10A, 250VAC, res., +85°C, Class B or F only 100x103 ops.
AgCdO: form A, 10A, 250VAC, res., +85°C, Class B or F only 50x103 ops.
AgNi: form A, 10A, 250VAC, res., +85°C, Class B or F only 50x103 ops.
Contact ratings, form A/form B
10A/6A 250VAC resistive
10A/6A 28VDC resistive
Mechanical endurance, DC coil
10x106 operations
Coil Data
Coil voltage range
Operative range, IEC 61810
Coil insulation system according UL
3 to 48VDC
2
Class A, B, F
Coil versions, DC coil
Coil
Rated
Operate
Release
Coil
code
voltage
voltage
voltage
resistance
VDC
VDC
VDC
Ω±10 %
003
3
2.1
0.3
25
005
5
3.5
0.5
70.0
006
6
4.2
0.6
100
009
9
6.3
0.9
225
012
12
8.4
1.2
400
024
24
16.8
2.4
1600
048
48
33.6
4.8
6400
Rated coil
power
mW
360
360
360
360
360
360
360
Initial dielectric strength
between open contacts
between contact and coil
Clearance/creepage
between open contacts
between contact and coil
Clearance/creepage
between open contacts, standard type
for 6kV dielectrial strength type
between contact and coil, standard type
for 6kV dielectrial strength type
750Vrms
1500Vrms
>1.6mm
>3.2mm
>1.6mm
>4mm
>3.2mm
>4mm
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
-30°C to +70°C
Category of environmental protection
IEC 61810
RTII - dust protected
RTIII - wash tight
Weight
9.5g
Resistance to soldering heat THT
IEC 60068-2-20
RTII: 270°C/10s
RTIII: 260°C/5s
Packaging/unit tube/25, carton box/1000
Accessories
Product Code
27E1064
Description
Socket, rated 10A at 300VAC. UL Recognized for US
and Canada. Designed to fit same suggested board
layout as relay.
All figures are given for coil without pre-energization, at ambient temperature +23°C
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
1