TA8428K/FG
TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT
SILICON MONOLITHIC
TA8428K, TA8428FG
DC MOTOR FULL-BRIDGE (H-BRIDGE) DRIVER ICs
(Forward/reverse switching driver ICs)
The TA8428K, TA8428FG is Full Bridge Driver IC for Brush
Motor Rotation Control.
Forward Rotation, Reverse Rotation, Stop and Braking
operations are available.
TA8428K
FEATURES
Output Current : TA8428K
TA8428FG
1.5 A (AVE.), 3.0 A (PEAK)
0.8 A (AVE.), 2.4 A (PEAK)
4 modes (forward/reverse/short brake and stop) are available
with 2 TTL compatible inputs control. Free-wheeling diodes
for back-EMF protection are equipped.
TA8428FG
Thermal shutdown and overcurrent protection circuits
Operating voltage range: VCC = 7.0 V to 27.0 V
Weight
HSIP7−P−2.54
: 1.88 g (Typ.)
HSOP20−P−450−1.00 : 0.79 g (Typ.)
The TA8428FG is RoHS compatible.
The TA8428K is a Sn-plated product. (The Pb-containing materials
with a high melting point that are exempted from RoHS directives are used inside the IC.)
About solderability, following conditions were confirmed
• Solderability
(1) Use of Sn-37Pb solder Bath
· solder bath temperature: 230°C
· dipping time: 5 seconds
· the number of times: once
· use of R-type flux
(2) Use of Sn-3.0Ag-0.5Cu solder Bath
· solder bath temperature: 245°C
· dipping time: 5 seconds
· the number of times: once
· use of R-type flux
Terminals of TA8428 written below are sensitive to electrostatic discharge. When handling this product, ensure that the
environment is protected against electrostatic discharge by using an earth strap, a conductive mat and an ionizer. Ensure
also that the ambient temperature and relative humidity are maintained at reasonable levels.
Terminals which are sensitive to electrostatic discharge: No. 1 and 2 (TA8428K), No. 8 and 9 (TA8428FG)
The IC should be installed correctly. Otherwise, the IC or peripheral parts and devices may be degraded or permanently
damaged.
1
2010-02-23