S102S12 Series
S202S12 Series
IT(rms)≤8A, Built-in snubber circuit
Zero Cross type
SIP 4pin
Triac output SSR
S102S12 Series
S202S12 Series
∗
Non-zero cross type is also available. (S102S11 Series/
S202S11 Series)
■ Description
■ Agency approvals/Compliance
S102S12 Series and S202S12 Series Solid State
Relays (SSR) are an integration of an infrared emitting
diode (IRED), a Phototriac Detector and a main output
Triac. These devices are ideally suited for controlling
high voltage AC loads with solid state reliability while
providing 4.0kV isolation (V iso (rms) ) from input to
output.
1. Recognized by UL508, file No. E94758 (as models No.
S102S12/S202S12)
2. Approved by CSA 22.2 No.14, file No. LR63705 (as
models No. S102S12/S202S12)
3. Package resin : UL flammability grade (94V-0)
■ Applications
1. Isolated interface between high voltage AC devices
and lower voltage DC control circuitry.
2. Switching motors, fans, heaters, solenoids, and
valves.
3. Power control in applications such as lighting and
temperature control equipment.
■ Features
1. Output current, IT(rms)≤8.0A
2. Zero crossing functionary (VOX : MAX. 35V)
3. 4 pin SIP package
4. High repetitive peak off-state voltage
(VDRM : 600V, S202S12 Series)
(VDRM : 400V, S102S12 Series)
5. Built-in snubber circuit
6. High isolation voltage between input and output
(Viso(rms) : 4.0kV)
7. Screw hole for heat sink
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1
Sheet No.:D4-A02901FEN
Date Apr. 28. 2004
© SHARP Corporation
