The Centi Line - .075" Contact Spacing
The Cannon Centi connectors are especially
suitable for commercial applications such as
computers, instrumentation, communications
and audio equipment. They are available in D
subminiature size metal shell rectangular, plastic shell rectangular and strip configurations.
All Centi connectors use the reliable twist pin
contact design in a 5 amp version terminated
on .075 (1.91) and .100 (2.54) centers. The
Centi contact is crimp removable, connectors
are available for customer assembly. Standard
crimp and assembly tools are available.
The twist pin contact is recessed within the
insulator housing while the rugged cylindrical
socket is exposed. When the connector halves
are mated, the chamfered sockets guide the
pins into positive alignment. The CentipinTM
contact, now under compression, forms a
multi-point contact with the CentisocketTM to
provide a high degree of reliability.
• Contact rating: 5 amps max, except BR
Series (2 amps max.)
• Contact retention: Crimp snap-in/removable.
Standard Data
• Minimum contact centers: 0.075 (1.91).
• Wire sizes: #22 thru #26 AWG, stranded or
solid.
• Contact termination: Multiple indent crimp.
• Contact materials and finish: Copper alloy,
gold- plated per ASTM B488, Type II, Code
C, Class 1.25.
• Mating/unmating force: 12 oz. per contact,
max.
Performance Data
Test
Method
Dielectric Withstanding Method 301:
1,000 VAC at sea level
Voltage
300 VAC at 70,000' altitude
Criteria of Acceptance
No breakdown
No breakdown
Insulation Resistance
Method 302, Condition A
5,000 megohms minimum
Thermal Shock
Method 107, Condition A
+55˚C to +85˚C
Method 213, Condition I:
100 G's, 3 axes, 6 millisecond
duration sawtooth pulse
No physical damage
Method 204, Condition B:
15 G's, 10-2,000 Hz, 12 hours
500 cycles of mating and
unmating, 500 CPH max.
No physical damage
No loss of continuity> 1µsec
No mechanical or electrical defects
Method 106, Omit 7a and 7b
Method 101, Condition B:
48 hours
Method 307:
At 5 amps
-
Insulation resistance > 100 megohms
Shall be capable of mating and unmating
and meet contact resistance requirements
Physical Shock
Vibration
Durability
Moisture Resistance
Salt Spray
Contact Resistance
Contact Retention
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
59
No physical damage
No loss of continutiy> 1/µsec
9 milliohms maximum
4 lb. minimum axial load
(after 10 insertion extraction cycles)